Search results

  1. shakeybones

    New Build Thread - XS650 Swingarm Chop-Shakeybones

    Been getting settled still and trying to piece together this new workspace. I also got conned into a CB125 monoshock project for a friend. So I have been working on that lil guy. I did order some XS650 parts finally! I got a deep tunnel peanut tank and a fender from led sleds customs. I am...
  2. shakeybones

    New Build Thread - XS650 Swingarm Chop-Shakeybones

    Ok! back on this thing finally! I moved shop space to my new house so that took a while to move and transition. Before I can get to building I need to finish fitting the shop to be usable. I will return soon with shop buildout pics and some new photos of what has been done on this project
  3. shakeybones

    New Build Thread - XS650 Swingarm Chop-Shakeybones

    Lets see here... Been down and out due to some broken toes. Build has been slow the last week or so due to the beat up foot and waiting on parts. I been assisting with some other peoples builds at the shop....while I sit in a chair. Its like office hours but for degenerates. Anyway, I have...
  4. shakeybones

    New Build Thread - XS650 Swingarm Chop-Shakeybones

    Sounds good! Have a good trip!
  5. shakeybones

    New Build Thread - XS650 Swingarm Chop-Shakeybones

    Oh damn. Well fair enough! I have your tools I need to return also. Are you out of town? If not I can come by Friday after work
  6. shakeybones

    New Build Thread - XS650 Swingarm Chop-Shakeybones

    I will post up a pic of the coil tomorrow. Called it quits because I was boiling alive in the shop tonight and full of metal shavings and beer. I would definitely like some advice on wiring that coil though. It's different than any other coil I have had. Thanks Jim!
  7. shakeybones

    New Build Thread - XS650 Swingarm Chop-Shakeybones

    I got some parts today. I got some 11" shorty chrome shocks and a new coil. Single coil double pole. It's kinda confusing because it has two terminals for input which I would assume is from the points but no dedicated power. I am assuming the power gets spliced in before but I havent really...
  8. shakeybones

    New Build Thread - XS650 Swingarm Chop-Shakeybones

    I also ordered just now a hydraulic slave cylinder for a clutch conversion. As I do that specific upgrade I will do a detailed pic and write up post.
  9. shakeybones

    New Build Thread - XS650 Swingarm Chop-Shakeybones

    Not a lot of movement due to whiskey, fireworks, the Blue Angels in town and general dirtbaggery from the last 4 or 5 days. I finished filling and smoothing the stock frame gusset areas. I have some beefy 11" shocks en route from the vendor as well as a coil and reg/rec so I can get the...
  10. shakeybones

    New Build Thread - XS650 Swingarm Chop-Shakeybones

    I am still deciding but I found this to be a pretty sweet package.... https://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-carburetor-parts-xs650-mikuni-34mm-carburetor-mikuni34mm-001-235.html
  11. shakeybones

    New Build Thread - XS650 Swingarm Chop-Shakeybones

    Taking a tip from Jim. Filling and shaving my frame gusset plug welds.
  12. shakeybones

    New Build Thread - XS650 Swingarm Chop-Shakeybones

    I am not planning on a swingarm stretch. Just a low short bike this time. The final resting place of the shocks are basically what I have shown. Those old rusty ones were just some crap I had laying around for mock up. They new ones are 11" chrome and the angle will actually be a tiny bit more...
  13. shakeybones

    New Build Thread - XS650 Swingarm Chop-Shakeybones

    Thanks gents! Will do!
  14. shakeybones

    New Build Thread - XS650 Swingarm Chop-Shakeybones

    And with the engine mocked up
  15. shakeybones

    New Build Thread - XS650 Swingarm Chop-Shakeybones

    Aaaaaand....here we go
  16. shakeybones

    New Build Thread - XS650 Swingarm Chop-Shakeybones

    Well, I finally got tracking and the brat kit is en route and will be here tomorrow. When I get it fitted I will post up some pics and keep this train moving.
  17. shakeybones

    New Build Thread - XS650 Swingarm Chop-Shakeybones

    I assembled my forks last night. Updated the drain plug and 8mm socket heads holding them all together with new hardware and crush washers. I sent another nastygram to monstercraftsman this morning. He insists it is getting picked up by USPS today and to check my tracking later but I wont hold...
  18. shakeybones

    monstercraftsman not shipping my order

    I have. just a shame because their stuff is pretty nice but I wont order from him again.
  19. shakeybones

    monstercraftsman not shipping my order

    Yeah but it just says its still in MD...since last Monday
  20. shakeybones

    monstercraftsman not shipping my order

    Lol still no parts...but I did get an email to review the product....? what?
Back
Top