Search results

  1. 6

    Key switch wiring help - Hugh's CDI kit

    Thanks. I'm not using a battery, but a capacitor. So I'm guessing that goes to the "B" post? Also, I already have the kill switch grounded. Do I need to ground both M posts?
  2. 6

    Key switch wiring help - Hugh's CDI kit

    Finishing up my wiring finally and could use a little help. I have a kickstart only bobber running Hugh's Handbuilt CDI system. Take a look at the pic I attached of the standard switch I'm using. Need to know what goes where. Thanks!
  3. 6

    Need bobber turn signal switch - what can I use?

    I'm wiring up my handle bar and wondering what to use for a signal switch on a 1" bar. I can't find much for toggle switches. Maybe I'm just not looking in the right place. What have you guys used on your rides?
  4. 6

    Brake switch wiring question - bobber build

    Thank you!
  5. 6

    Brake switch wiring question - bobber build

    I've been looking at so many wiring diagrams and I'm still confused. I want to wire up front and back brake switches. How do you do this so one or the other trigger the light? If they're both on the same circuit and you just use one switch isn't the circuit still open? I know there's a basic...
  6. 6

    Bobber build - air hose question

    Engine and carbs are in. I’m going with K&N style air filters. I’m guessing the two larger hoses coming off the engine are air hoses to the original air boxes? Do I just remove them and cap off the ports?
  7. 6

    Random frame question - hollow or solid? - see pic

    I don’t think it’s solid.
  8. 6

    Random frame question - hollow or solid? - see pic

    I just realized how stupid my question was. It’s part of the hardtail. 🤦🏻 It’s voodoo vintage by the way.
  9. 6

    Random frame question - hollow or solid? - see pic

    I'm installing Hugh's CDI system on my bobber and want to mount the regulator on the bottom cross member of the frame. See picture. Is this hollow or solid? I want to drill and tap so I can bolt it in place. If it's solid I'll look for another place.
  10. 6

    Random frame question - Hollow or solid - see pic.

    I'm installing Hugh's CDI system on my bobber and want to mount the regulator on the bottom cross member of the frame. See picture. Is this hollow or solid? I want to drill and tap so I can bolt it in place. If it's solid I'll look for another place. Thanks.
  11. 6

    Hugh's CDI system wiring - dumb points question

    I'm hooking up the new CDI complete kit from HHB. It's a 78 Special with kickstart only. I'm not great with electrical stuff... Does this system replace/bypass the need for the points that I had on the original setup? There's no mention of what to do with that wiring in the instructions. Thanks.
  12. 6

    Bobber wiring harness

    Hi, I was wondering where I could get a basic harness. I'm building a bobber and at the point where I need to starting the wiring. I want something pretty basic. • Headlight Hi/Lo beam • Kick start only (Hughs Hand Built CDI system) • Front/rear directional • Brake light Handle bar switches...
  13. 6

    650GTS - Nasty Bobber Build

    Engine finally in. :cheers:
  14. 6

    Front wheel not spinning

    Not exactly sure of the spoke length but Mikes XS site sells the kit I used.
  15. 6

    650GTS - Nasty Bobber Build

    Hmm. I don't have any oil in it now. I might give that a try. Thanks.
  16. 6

    650GTS - Nasty Bobber Build

    Engine going in as soon as I get some free time.
  17. 6

    650GTS - Nasty Bobber Build

    Went with the TC Bros. kickstand. I think it's time to bolt the motor in her.
  18. 6

    Front wheel not spinning

    Finally got every thing right. The spacer in the hub which was put in by someone else was incorrect. I used the one from my mag and installed new bearings. Rollin' smooth now. Thanks to all for the input. 👍
  19. 6

    Front wheel not spinning

    I measured everything and my hub is dead on with the dimensions above. It's from an XS650 for sure. All of my axle and spacer measurements check out too. This is really weird. I started with a 78 Special with mags if that makes a difference. So the axle, speedogear, basically everything on...
  20. 6

    Front wheel not spinning

    Thanks I actually don’t have a caliper on there right now. I’m going to try the suggestions above tonight. I’ll let you know…
Back
Top