Search results

Thanks for everyone’s input on this, looking forward to taking a ride out, sorted the carb, was a sticking float

All sorted, started 1st press of the button? The left carb is flooding now!

Thanks, sorry I had read that thread and lost the plot a bit,.. basically I should just join the brown and red/white back together, they were once joined rather than connected,.. the earthing to the starter motor will only happen when the starter lever is triggered. It is in effect 4 wires...

Isn’t it just these two wires? Although I do not know where to wire the brown...

The Kill switch inside casing has brown and another red/w the same as your pic. This leads down to the other free wire r/w, coming from the loom and shows continuity in run position, but not kill, so definitely power from there...

This brown wire has continuity between it and the starter lever wire and both the starter solenoid

Just about to have a look this morning. One wire that hasn’t been mentioned is the brown one from the electric starter lever. I have done a continuity from the lever, it would appear the other end comes out of the loom by where the coils were, I have it labelled previously as connected to coils...

Here you go, I’ve done what most do I think, although I used the hole nearest the rear instead of the front like others. I figured the space gets narrower towards the front. Drilled an extra hole in the metal supporting bracket. I used two 1/2” nylon spacers, then thread locked the bolts through...

I have this one and I own a Haynes in b/w, if you have another that will help that’d be great

I will do, thanks, yes you and I are having exactly the same dilemmas, I just haven’t read anywhere else to blank off wires, I just want to be sure that we are definitely going down the right route. I do not have a red wire with white added, my red/white stripe wire I think goes directly to the...

Hi Runriot, The info on blanking the grey and orange wires off, did you get that from Boyer or has some one told you this? Have they done this conversion before? It is the first I’ve heard to blank them off, I kind of guessed it might be the case but as they are sill connected at the other end...

Thanks grizld1, It is my first post up on here so still trying to find my way around. I’ll made a search on Runnriot... I thought as much about the condenser but the info supplied had no reference. My bike has an electric start, I’m not sure they all had the same system. I’ll go through what you...

Hi all, Before you all groan and say this has been done to death, please just take a deep breath and see if you can help me out. I have made a start fitting the kit following the instructions provided but find them a bit misleading, there is no instructions on what to do with your current...