Search results

I have a set off my RD350, are they identical?

That looks sweet! However I can see that its more than 60mm. Do you know where these bolt on to?

Does such one exist? With 60mm. between the mounting holes. Regards, Lasse

Twist the spring and put coins in the openings. On first use, the coins will fall out. Done.

I have just "eyed" mine, and based on my experiences with kickstarting it. In my experience, it's not as sensitive as people make it.

I'd get a standard bike instead, you'll spend alot of money reaching something half-assed, been there :)

http://www.cmsnl.com/ Carry NOS parts.

Not a mod, but cleaning the bike will tell you what it needs in good time.

Tried, it's alot of wiggle, maybe 1mm. or more I think.

Then take of the clutch cable, is it still mushy?

Is the lever tight RIGHT from the beginning? Screw in the adjuster totally, is it the same then?

Thank you!

Hello Seems like I have a leak from the startercover. Is there anything I should take notice of when removing it? Gears or springs that pop out etc?

Do you have any slack in the grip? If so, make some, it SHOULD remedy it.

Would a barsnake work in clubman bars? Thinking the tight bends might obstruct

I'll be trying a taller gearing for starters. I lost the socket I normally use for frontsprockets, isn't it a 36mm or something?

Any news on this?

Yep, cool, thanks guys! :)

I have the round type brakepads, that there is for the other type, right?

I have no drag on the discs at all, will not bother overhauling the original unit as it has hit pavement at some point and is somewhat scored. I knew about the ratio guide there. My original unit is 11/16ths, so I'm looking for something a bit smaller.