Search results

Like the title says. Two different lengths needles in my carbs. Been quite some time since I rebuilt a set of these, but don't remember different lengths needles.

78 xs650 clutch pack was seized up so replaced the cork discs. Now have a working clutch. Cleaned out and repacked the work gear ball bearing and rod. Adjusted cold by loosening nut, turning screw in until felt a little resistance, backed out a 1/8-1/4 turn, tightened nut. Adjusted at lever...

I have a 79 or 80 xs650. Need the rear brake pivot the foot control arm connects to. The splined shaft if you will. Price shipped to 48911, Lansing MI

Looking for a front or rear brake caliper in usable condition. Doesnt have to look the greatest, just work. Shipping to MI 48911

rear disc brake with a seized hose bolt. Had to drill it. Still a chunk in there but I may have hit the threads. So what are my options? Can I drill and tap for a larger bolt? Will a front caliper work on the rear? I have an extra. Upgrade the rear caliper from another bike?

looking for the 3 clips for the rear caliper. One is shaped like an H and goes in the caliper under the pads, the other 2 go on the sides I believe. Mike XX has its for $15 ish shipped. Hoping to save some money, budget build!

Rear disc caliper , not sure from year or if it matters. Likely an 80 special. Waiting on a new brake line yet so trying to get this figured out. No pads with it. Have bracket mounted on axle, caliper on that. Need to get a bolt for the bottom of caliper. There’s what I imagine is a slide...

check out my website iwfabrication.com Instagram iwfabrication and fb iron Willys. I make custom decor from old and new parts, reclaimed wood and metal. Something for everyone and I do custom one off pieces if you’re interested! May 6th in Adrian MI we will have a vendor booth setup for the...

Id like to get them for cost of shipping or pick up if youre in Michigan. I am willing to pay a small price and shipping though. Any condition. Shoot me a price with shipping to Lansing, MI 48911. Ill offer a 10% discount on any of the products I make with my business. Website is IWFabrication.com

Looking for a kickstand for a 79. Should be the one with a solid end with a hole to fit over the solid threaded piece off the frame. If I can get the spring and bolt with it that would be best.

hardtail frame with the exhaust running on either side next to the frame. With the reservoir tube angled off the master im having a hard time figuring out where to mount the master so the tube is angle horizontal or further up and have the angle where the brake rod pushes at a decent spot...

Looking for a lower bearing set. New, used, stock, aftermarket. Doesn't matter. I need race from the neck, race from the frame, and ball bearings, caps, all of it.

78 xs650 I received with out a front end. Swapping a different front end but need the lower bearing races and ball bearings. Stock, used, new, doesn't matter. Looking for free and cost of shipping as most of us tend to throw these out any ways when replacing with roller bearings.

Been a while since I've been on here. A few years or so back there was someone who made carb needles that were left and right side dependent due to one side running leaner. Anyone know where to get a set of these? Possibly the same person, there was someone who did cam work for relatively...

Hard tail xs650, with exhaust running next to the lower rails. It has a rear disc brake and I'm having some trouble trying to positing the MC. I can't put it in between the exhaust and frame so its got to be below or above the lower rail. Ive assumed putting it under the bike is a bad idea due...

In need of a brake pedal. Not sure if they are different for different years but as long as the splines match for mounting the shape length won't matter as Ill be modifying it.

78 xs650 (hard tail), rear disc wheel. from left to right on the rear axle I have: chain/wheel adjuster, wheel collar, wheel, caliper bracket, chain/wheel adjuster I feel like theres another wheel collar or spacer that needs to go on the right side of the wheel before the caliper bracket.

I need the swing arm pivot bolt. Most you guys who did hard tail should have it laying around.

I am wondering the length of the pivot bolt for the xs650 1978. I swapped an fzr600 arm on one of my builds and the fzr pivot bolt is not the same length. I was told it was the same as the xs650, unless the person just meant diameter - which it is. If they are not the same length i need a...

Might seem like a dumb question but will the regulator short if the housing touched the frame/ground? Ive noticed the all regulators I've dealt with have the rubber grommets on their frames and wasn't sure if this was due to vibration dampening or to keep from shorting. Also when making a...