Search results

Before you get on me about doing a search I did and can not find what I am looking for. I have a 750 kit, with vm 34 Mikuni carbs and a 2 into 1 header having a fit trying to get the jets right just wondering if some one else has this setup and what jets you are using so I have a starting point.

I thought i was the only dumbass that did this ! I found out when putting on a new ignition also.bike runs fine has 750 kit, cam, carbs dynoed at 70 hp. what i did was make a spacer to go behind the circuit board to bring it closer to the rotor and it works fine.i am using a probe engineering...

Has any one but me ever put a cam in wrong? It has been like that for 3 years with no problem, bike has a 750 kit and magacycle cam and dynoed 70 hp. I found out it was wrong when i went to put a new ignition on .made a spacer and all is good. just want to know if any one else is running a cam...

Bore Tech in the Cincinnati area, had him do a big bore and cam and total rebuild and a dyno run 70 hp! Full machine shop, parts, dyno. try www.bore-tech.com Bill Moeller 513-625-8374

me to ! !!!!!!!!!!!!!!!!!!!!

I have heated grips and a heated jacket liner works great !!

they are a little long, easy to cut and sand to shape on my xs i welded 2 cross bars that came with the seat across the frame rails drilled and taped the holes , drill through seat pan and flat head screws hold it on hook and loop tape hold pad on, when i got mine it came with...

i am 5'5 also and can put 2 feet down flat ,i think the pad is about 1 to 1and1/2 thick but it is a little hard.

yes i have used Hotwings seats i have two 1 on my xs and 1 on my 750 honda i did cut and shorten the loop on the xs for a better fit and look. I did meet the owner at vintage days and he took some photos of my xs , great guy will buy the next seat from him !

OK here are the details. I built this bike 5 years ago the engine was done at Bore Tech it has a 750 kit magacycle cam mikuni vm round slides uni filters Barnett clutch and a 2 into 1 exhaust (photos show the old exhaust) front forks have progressive springs and the rear shocks are gas from...

thanks i did put some pix up check them out in the albums

81 xs650

Just wanted to say hi just found the site looks like the place i want to be !