Search results

  1. D

    Feedback for JoshieKona

    Purchased a set of hard bags from JoshieKona. They were packed well, shipped quickly and arrived a-ok. Thanks, Sir!
  2. D

    Wanted - XS-1 Front Fork Reflectors

    Looking for a pair of front fork reflectors for my XS-1, OEM part #256-85111-10-00. Thanks.
  3. D

    XS1 lower fork tube bushing availability?

    Is there any source for replacement XS-1 lower fork tube bushes and the metal 'snap ring' that goes just above it? I got a set of replacement tubes from Forks by Frank and the instructions say to remove the lower bushings from the old tubes and install them on the new tubes. I don't have the...
  4. D

    Carb guide jetting specs chart for 70-73?

    I have a question about the jetting chart in the carb guide. The section for '70-73 shows two different pilot and mix settings. Am I reading this correctly that there were the settings specific for 70/71 (45P and 1 mix) and then 72/73 (42.5P and 3/4 mix)? Why the difference if so? Attached is...
  5. D

    Sold / Found / Inactive - Early oem handlebars

    Found a set! Thanks Folks! Thanks also 2M for the info, that was helpful. Looking for a straight set of oem bars for my XS1. PM/email with photo and price delivered. Thanks folks.
  6. D

    XS-1 fork cap bolt, whaaaa?

    What is the purpose of the fork cap bolt on the XS-1? It doesn't preload a nonexistent internal spring. Block off for accessory/aftermarket air valve? Thanks folks!
  7. D

    Sold / Found / Inactive - I want your speedo...and tach 82/83

    The prior-abusor of my '82 XS tried to cut the faces off my speedo and tach...and I'm tired of having to re-electrical tape them each season. Got a speedo and tach pair in your parts bin of your 82/83 chopper build that are in good shape? I'd love to return them to service on my cafe-ish. Got...
  8. D

    Wanted - XS1B Fork Internal spacers, washers, etc.

    Looking for a set of XS1B fork internals. I do not need the springs or fork tube caps, but everything else that is inside the fork that the springs ride on and against like spacers, washers, etc. Thanks all.
  9. D

    XS1 Headlight Adjuster

    Does anyone have a good diagram that shows how the XS-1 headlight assembly internally all fits together? I had a hell of a time last night getting the chrome trim ring off and bulb out. Part of the problem is the horizontal adjuster screw for the bulb ( think that is what it is for) was all...
  10. D

    XS-1 drum brake service limits?

    Does anyone have a specification for the max service limit diameter on the front and rear drum brakes on an XS-1? What options does someone have if you're beyond the service limit? New hubs? Can the drum be re-lined? Thanks folks!
  11. D

    Sealing up cases, coat the oil seals with sealant?

    What is the consensus on whether to coat or not coat the oil seals with __insert favorite case sealant__ prior to setting the cases together and torquing everything down? I'm at the stage with my XS1 engine that I'm ready to button it up, however, I'm torn with whether I should or should not...
  12. D

    Sold / Found / Inactive - XS1 / XS1B Chrome rear fender stay

    **Edit - Found! Thanks Dylan!** Long shot I know...but looking for a chrome rear fender stay (aka bracket" for an XS1 or XS1B. An XS2 unit will not be correct, must be the earlier unit. Thanks.
  13. D

    Wanted - Found! XS1 / XS1B cylinder (4 bolt type)

    Update 17 Jan, I was able to find a cylinder, thanks! My XS1 cylinder did not survive the transit to Hoos Racing to be bored, so I'm looking for another 4 bolt tensioner type cylinder. Must have no broken fins and must have usable sleeves in it. Thanks.
  14. D

    Early XS Head Pipe Differences VS 74/75 units?

    I (like a lot of others) am having trouble finding a set of OEM double-walled head pipes for my 1972 XS-2 restoration project. The only concrete differences I've found are from this PDF: http://www.biker.net/70-73_650_parts/engine/70-73_exhaust.PDF, which shows the following for the early head...
  15. D

    Wanted - XS2 exhaust, side covers, other misc parts

    XS2 exhaust, turn signals, center stand I'm looking for some parts for my '72 XS2 restoration project. I'm needing the following: 1. Full XS2 exhaust or at least a nice pair of OEM head pipes found! 2. Side covers found! 3. Air box assembly found! 4. Front and rear turn signals 5. OEM...
  16. D

    BS34 Choke (Enricher) not raising RPMs ?

    SOLOVED!. BS34 Choke (Enricher) not raising RPMs ? Hello folks. I have an interesting situation with a pair of BS34 carbs. My '83 year model had a pair of earlier BS34's on it with the hand type choke that I used to learn a bit about tuning, jetting and synchronizing. Ran fantastic with...
  17. D

    Needle Shimming - How much equals up one jet size?

    Hello XS Gurus. First my appologies if this has been covered, I can't seem to find searching the forum. Is there a general "rule of thumb" regarding how much a needle is shimmed before you're effectively at the next size pilot jet? Obviously the thickness of the washers would play into...
  18. D

    Wanted - BS34 Pilot and Main Jets

    Looking for the following BS34 jets, new or usable used. Pilots: 40 47.5 50 Mains: (large style) 127.5 130 137.5 140 Email/PM with price delivered to 80526. Thanks!
Back
Top