Search results

I ain't never won nothin before. might as well sign up to lose this too. Congratulations somebody else.

Sign me up! I see no place to sign up myself.

Hello Daddy G, my brother told me about you. I want a wiring harness. Do you have one available? I want signals included and electric start. Thanks.

I noticed My kill switch was getting hot and I was blowing a fuse. All of the sudden the last time I replaced the fuse still nothing worked. I remembered the kill switch being hot and messed around with itand that is what the problem was. It had slowly burt up. Just a suggestion when you...

Well the bike magically healed itself. I have no idea what was wrong. I have no idea why its right. One of those things that you know is going to happen again. You just dont know when or how far away from home you will be when it happens.

Thanks for the help. No I didnt ride it home. It wouldnt start. The battery had 12.5 volts but the kick wouldnt go past a certain point and the starter couldnt turn it. I had used the starter 10 minutes earlier when I left my house. I got the bike back in neutral when I pulled into the parking...

Hello again everyone, I stopped at a cycle shop where a man who claimed to have a great deal of knowledge of xs650s watched me pull in. He said as I got off my bike. "I noticed your bike is still pulling after you pull in the clutch." I told him that it is hard to get into neutral but I...

I finally fixed it!!! The float had a hole in it. I guess every time I got around to taking it off and shaking it there had been time for the gas to drain back out. This time I tryed a float setting and it didnt work so I jerked it back apart within a few minutes and there it was. I appreciate...

http://www.factorypro.com/tech_tuning_procedures/tuning_carbtune,CV,lower_rpm_engines.html says dont compress the spring. I will reset them and try again. Did not know this. I never saw a needle with a spring in it either.

There aint a speck of dirt inside here anywhere. The tang has no problem as it rubs against the needle pin. Im going to give up for tonight. staying up all night wont help. Thanks again

Can those spring be too weak in the needle? Seems like when I adjusted the float the spring let the pin sink down a quarter of the travel. Do you adjust the float touching the float tang to the top of the needle pin or let the weight of the float push down the spring pin (letting gravity find...

Hey everybody, I tryed the gas cap. There was no change. 650sf, There is a thin aluminum washer under the seat. Is that significant?

Ok i will try opening the gas cap first. Please tell me more. I have a peanut (harley) tank with a pingle petcock. Hose down to a inline filter that then splits off to go to each carb. I will post tomorrow evening. Thanks

Both sides of the float are set at within .010 of an inch of each other. Im a bit of a nut about stuff like that. I couldnt live with one side higher than the other. The pin Is straight as can be. I grabbed it in a drillpress and it spins true. There is something I am not seeing. Im looking at...

Thanks for helping everyone.

I checked the float. It is dry inside. I checked the pin. It is smooth. I have tryed to move the float on the pin to each side and manually get it to hang up and it wont. The little spring pin in the needle works fine and comes out to the same position every time. Ive checked it about ten times...

I just took them off and checked for something at the needle and seat and found nothing to keep it from operating. The float level is at .937 from the gasket. I dont see anything wrong. I put it back together. ((((This time it still leaks.)))) I took a picture of where the gas was...

Hello everybody, Has anybody had a problem with a bs38 carb letting a stream of gas run out of a pod filter about the same diameter as the inside of the fuel hose coming into the carb? I can take the carbs off and pop off the bowl and nothing seams to be binding, no trash. This is the...

I finally got to take mine out and ride it. Dont have no speedo on it so guesstimation on mileage is about 80. Man it was fun. I got out on the 220 bypass here in Asheboro, NC where it is supposed to be 65mph and and tryed to keep up with some of these people and my glasses were sinking up in my...

What I have on the bike. 1 headlight 2 horn 3 (dont got em but want em) signals 4 taillight 5 electric start (doesnt work-starter good new bendix wiring bad) 6 speedo (dont have one but I know they need to be lit up at night when i get one) That is all I can think of. It has the key...