battery box

Make a "REASONABLE" offer for any parts shown you are interested in.

I am curious about the weight of the stock alternator rotor and stator, as well asthe battery box incl. voltage regulator and all other doo-dads, except the starter solenoid.? I would like to build a shallower, lighter battery box, so I can free up more space for longer air filters. I already...

Howdy All, I’m looking for a ideas on a new location for a Battery Box. I purchase a lithium ion battery so I’ve got space to playo with. I would like to leave as much open space as possible below the seat. Also, any ideas on a good way to create a electrical tray under the seat? Thanks, Brad

On my stock '75 XS650, a bolt is stuck but spinning freely. It's the lower bolt that the left airbox mounts to the battery box. This means I cannot remove the left airbox, which makes removing the left carb nearly impossible. The thing is, that spot is very awkward. The rear of the bolt isn't...

I received a custom wiring harness done by daddycycles here on this site. His work is top notch and he made it almost idiot proof for an idiot like myself when it comes to wiring. Here's my question (no such thing as a dumb question) I do not know exactly what these two left over pieces do...

Time to clean up the rats nest of wiring.. I'm running with a headlight tail light and horn. no blinkers or tag light. I also don't use my electric starter. Any one running a ballistic type battery or something similar? I replaced my rotor about 9 months ago (custom rewind) have a extra set...

just curious as to what you guys think is the best route for the battery box area? I am putting my electrical "fuse panel" in this area and I am not running a battery. Is it a possibility to chop er off or do i build a box? the lower rails that is...

Firstly, I'm a noob. OK I have been try to remove the starter solenoid with no success. I ended up rounding out the top of the screw and can't get a socket to stay on the bolt. I've already removed the airboxes but still can't properly remove the solenoid. So now I am trying to remove the metal...

I'm looking to open up the battery box area and relocate the various electrical components in there but I don't own a welder. Does anyone have any good non-weld battery box sources/relocation tips? Thanks! -j

Have any of you installed a G&L Battery/Electric Box in a frame that has not been hardtailed? Does anyone know if it is compatible with the area normally occupied by the stock battery box? Lastly, does anyone have an image of one mounted in this area? Thanks in advance.