bobber build

Many parts, frame, motor case(needs rebuild), jugs, heads, carbs, tank, wheels, exhaust, many parts, no title. Listed on a no reserve auction on ebay...

I have a 78 that I'm about to start disassembling. I'm going to hardtail it with a Voodoo MK21. I plan to leave the engine in while I tack weld the hardtail into place. Is there any particular order that I should follow while taking apart down to the frame? Just take pics and bag and label...

I have a complete bike for a build. Only has about 1800 miles. I will add some pictures in a few days. I am in Cumming Georgia. I do not have time to build this one. Some of the wiring harnesses is stripped for a bobber build. No tank. (unless I finish fixing the dents in it) $1,200.00 is...

Hiya, I've recently bought as XS2 and am looking to get some new tyres/rims. At the moment they're standard at 18" x 4.00 rear and 19" x 3.50 front. I'm using this bike as a donor so i can turn it into a bobber. Can anyone give me some advice on what size to go for. I've been told 16" rear 19"...

I have an 79xs650 bobber ive been building. I have pods and low backpressure exhaust. I had my left cylinder burning super hot, so i swapped the stock jets for 140 mains, now its still running super hot, but its black sooting now, so tomorrow ill raise the pilot jets up a bit. And lower the main...

My current build is a 71 xs that's hopefully going to have the look of a 40's/50's bobber but I can't find much in the way of vintage style brake and clutch controls. All I can seem to find for the 1"bars is modern harley stuff. I ain't into that. Any suggestions?

I am looking to build a bobber, I am looking into buying a early 81/82 rolling frame w/o a motor. Last year I bought a 71/72 650 motor, I was wondering if I would be able to drop that motor into that frame? Any thoughts!

Hello everyone just bought my first bike...... And it's an xs650!!!! Been in love with this bike since the first time I seen one, I hunted all summer with a low budget and almost gave up but I found one!!! The seller was pretty un clear on the details of mod's done to the bike and was wondering...

Finally pulled out the sawzall

Can't wait to chop into this

I cant seem to find a donor bike anywhere in canada. Ive seen a couple in detroit but costs a fortune to get it here. I found a frame and a motor for 600 bucks needs top end rebuild.. Is that was gnna cost me more then buying a complete bike?

Hello all, I'm a relatively new member to the forum, having pretty much just lurked around while considering the leap I have just taken. I have just purchased the following from a local custom builder: 1979 frame, partially chopped, with front end, wheels, and misc. body parts 1979...