brake lines

Hi All, I decided to replace the two line system with one single braided line. I have ordered a new brake line from Goodrige but the fitting they supplied doesn't fit. Firstly the adapter is convex on both ends and it needs to be concave to fit the ridged front line or the caliper. Also the...

To begin with I understand that there are a lot of threads concerning brakes, however i'm posting because i've been attempting to fix this issue for about a month with little to no progress and have reached despiration. Both the front (dual disc) and rear (disc) brakes on my 81 xs650 special II...

Okay so I have a 1980 xs650 with a pretty much stock break setup with a single caliper/disc setup and a cheap $25 eBay 14mm master cylinder. I got the aftermarket m/c because the original 14mm Master cylinder was pretty much shot and beyond repair. Here's a picture of most of the current setup...

Hey guys, I read some where on here that there is a supplier that you can order custom length brake line with swiveling fittings. I can't find this info and I anm finishing up a project and need to make the order asap. Can anyone please help me with a tip to a reputable supplier for the...

Ends rotate up to 1 full turn? On Mike's braided stainless hoses does he mean the hoses will twist up to 1 full turn? I see no rotation.

I am going to run a single disc and need a one piece ss brake line to fit superbike bars on stock risers. I'm thinking 34/36". Does anyone have a specific length that fits and where would you go for it? Thanks!