fender

I have some stock OEM fenders off of a 81 xs 650 special. $25obo dollars each. Plus shipping. Pickup available in CNY near Syracuse NY.

I have a 75 xs650 with no front fender. Can I install a front fender from other years without a lot of modification?

Looking for forks for a 1970 XS-1...fender too.

Pricing is iffy. I never know what stuff is worth so I find something on eBay in similar condition and match prices that way. You pay shipping! Comes with rear tail light and bulb, all wiring is there. I don't have rear signals for it, but the licence plate bracket and rear reflectors...

Hello, Bit of a newbie question but I recently bought an 1975 XS650B and subsequently discovered that the forks that were installed on the bike were XS400 forks, and totally don't fit the bike (the stem is too short). Because of this I've gone ahead and bought 34MM forks from a fellow forum...

I found a project I picked up a few months ago that already had a hardtail welded on and was looking to switch it up a bit to have it suit the style I was interested in. This is my first rebuild project and while I'm willing to put in (and already have) countless hours into it, I've run into a...

Hi guys ! Hope you are doing awesome ! I just discovered a front fender build for my XS650 I really like : http://www.bratstyle.com/shop/steel-front-fender/ It is steel and it is mounted high over the wheel, a bit like a MX bike...I like it ! Do you know any supplier, in the US or in...

My build for my brat is coming along! I am now looking for a front fender. I have attached a picture of a sporty as reff, as it is the look I am going after (clean and close to the tire.) Second bike is mine. MY questions are; -Is there any Harley front fenders ( not mounting brackets) that...

Bike has a visual impact brat kit, with disk brake's. I am looking at a sissy bar DIY kit from TC bros. Where are you guys mounting the strut to the swing arm on the DISK/right side? I'm planning on using the hole from the chain guard on the left side! Thanks in advance

ive been searching for a wile now on the forum for some good how to and or some good fenders to buy for a scrambler build. duz anyone have any ideas? thanks everyone

So, I made the mistake of letting my friend rip my bike in a parking lot and he ended up in the bushes after about 10 seconds of glory. I've uploaded some photos of the damage, but as far as I can tell the lower front forks are toast, gas tank is obviously dented, and front fender is bent. I...

Good evening guys. I'm in the midst of building a bobber/chopper with a tc bros hard tail. I am curious what width size rear fenders other guys are running on their bobber or chopper builds. I will be running a stock size tire on a 16 inch mag wheel (130/90/16 / MT90-16). I am having...

Okay, my bracket/inner fender support keeps breaking on me so I'm looking for ideas on doing things a bit better. Please excuse the booger welds, they were put on last time it broke to get me home and lasted about another 50-60 miles before they broke as well. What seems to be happening is the...

As title reads. It's a ribbed bobbed fender with fender strut. Originally came off older triumph. Fits 18" wheel. Mount is gonna need slight work as one mount ring is coming apart. Two mounting holes in bottom crooked? Gonna need a little work or just bolt her on n go. Depends on u. I'm to much...

going to next make a rear fender for my bike. wanted to start a thread and talk to people about how they have made some and if anyone has exsperience on an english wheel. hear ideas of making one out of a 55gal drum and a few other parts that can be shopped but figure it would be nice to just...

Hey all, just wondering -- it appears that a rear fender off of a "special" is shorter in length than those off of a standard bike. We are looking at fender options for our cafe build -- the 1975 rear fender we have is way too "long" -- am I correct in seeing that one off a special is shorter...

It's there a way to determine the factory color of my bike? It looks to have been painted a few times and I want sure what color it would have been. Also, any advice on painting the front fender and side covers that are plastic?

Hey guys it's me again, it's been a while, but I'm finally back at it. It's time to fix me stupid fender. It's a 6.5" trailer fender that I chopped down and drilled some holes in, I don't really mind how it ended up looking. The problem is that over the course of a few weeks of riding (last...

So my bike has just passed its inspection but as you can see there are a few items that still need to be cleaned / finished up. There are three areas on the rear of the bike that I don't really care for right now. 1) The space on the sides under the seat. 2) The radius of the rear fender...

I've seen various pics around the net with some folks running the front fender on the rear. I'm going to be swapping my 16" rear for an 18", and wonder if anyone has done the fender swap, and may have some tips on how to go about it? Got a new(er) tank, and if I need to cut some on the fender...