modification

I realize this may be considered blasphemous by some but I'm wondering if anyone knows of a reasonable (i.e. not custom race parts for $$$$$) way to add a long 6th gear to the platform. For example, is it possible to swap the transmission parts from another bike into the case (maybe an XS400 or...

Question, For for my build, my frame (78' XS650) started off with disk rear for brakes. I now have a switched to drum (I have a drum swing arm.) I am now left with the ugly rear master cylinder mounts (see picture.) So my question to the guru's is; Are the Rear Brake Master Cylinder mounts...

Hey everyone. I'm working on installing a flat brat seat on my '75 cafe build. In the picture, I have circled a piece of the frame that seems to just be there for structural support. The part of this brace that the arrow is pointed at (the bulged portion) is getting in the way of my seat. Is it...

I'm performing the Chrysler regulator mod on a 1978 XS650. The stock regulator has 3 wires (Brown, Green, and Black). The brown wire connects to the lower pin on the new regulator, and the green wire connects to the upper pin. What do I do with the black wire? Is it used to ground the regulator?

OK, I just bought a XS rigid coversion frame. I'm starting my bobber project, but the frame I bought looks too bulky. My frame has the original side supports where I believe the passanger pegs were bolted. Can I chop those? Most of the rigids I see don't have that extra support on...

Ok.. I have a 1975 I am bobbing (see at http://rodemyyamaha.com) and I have a Pamco Ignition with the Mean Green coils. I would like to know what else I should replace. I have spent a lot of money on this jewel and want everything to be the best. I will be making my own wiring harness so...