switch

I have a new switch that I thought was for a 1973 TX650 US but found out it was for a non-US model. It cost too much to send it back so I thought I would try to sell it here before EBay. $54.00 shipped.

Hello all, I've sketched up a wiring diagram for my 1975 XS650B, which is a hardtail chopper project. it has the stock alternator, as well as: a TCBro's reg/reg: http://www.tcbroschoppers.com/regulator-rectifier-yamaha-xs650-points-ignition-models.html. a TCBro's headlight...

Im looking to replace a broken ignition switch with oem or close looking to oem on my 1978 xs650 special but am having trouble finding ones that would fit in the original location. I dont want to relocate it as i like the spot it sits it. Anybody know of a model that fits?

I went ahead and bought an aftermarket switch. But in having a hard time finding a simplified diagram. To wire it up. My stock harness should be Yellow Yellow/blue Dark green Dark green Blue green Yellow blue. Here's a picture of the aftermarket switch I know someone knows these wires a...

I'm curious if anyone knows the minimum specs needed for an on/off ignition switch, specifically amp requirements? I bought an ignition switch from TC bros, but it's a little bulky. I'm wondering if I can find a mini key switch that might be easier to hide. PO had a toggle switch mounted...

I've got a surplus ignition switch that has 4 working keys, 1 original and 3 copies. In the first image, the surplus switch is on the right and is the shorter one. I removed it from a '76C. The taller switch on the left is the correct one for a '76C. From the code and images, can anyone...

High beam switch was broken so I used a screw and a bike valve cap as a fix. I drilled into the plastic and had to dremel the threads so it would slide in the channel. Was the only screw I had around. Like I said. Ghetto.

Hi, the ignition switch for my 78SE has a cracked (badly) housing, so I'm looking for a replacement (unless you guys think epoxy glue or something would be a good fix?) I was wondering about buying an aftermarket replacement and what the implications might be? I'm relocating the switch...

Hey guys: i recently bought my first 1980 yamaha xs650 and the electric start worked great for a few weeks. Recently something happened. i am looking very much into learning how to fix my motorcycle with your help. heres the situation. i turn my motorcycle on. i pull the choke out. i flip the...

I had to take apart my turn signal to re-solder the three contact wires. In my haste...I can't remember which screw the ground wire is supposed to connect to. Can someone help? If you have a picture, there will be many thanks! 1981 SH 650

So I bought a new front brake, brake light pressure switch from mikes and it's been on the bike for about 3 days and maybe 25 miles and it's already leaking brake fluid from where the Wires come out of the end of the threaded part. It forms a drop really fast when I squeeze the brake lever. Has...

Hi all, I've been wrenching on this bike (pics below - 79 XS 650) for a while now, as time permits. I am just in the final stages of getting some fiberglass work done, and make sure I get all the wiring figured out before breaking her down for some paint and powdercoating. Here is...