tech videos

Thought I'd share my video on polishing valve covers. keep in mind that you can always start at a lower or higher grit depending on the level of scratches that are already on the surface of the metal. Likewise don't be afraid to try out different buffing compounds on the wheel. Enjoy.

Before you start this job Disconnect the battery! As noted by TeeCat "I'd like to note that I was able to pull my stator without disconnecting it from the harness; I was able to just lay the stator safely out of the way." So don't do that part if you are not changing the stator,Ed

I had to do a small mod to make the job easier

Ok, here is a 4 part video tutorial on how to adjust the valves. My camera work is not too good, but you'll get the idea. Please note to do this with a cold engine. It's a pain until you get the hang of it, but is most essential. Remember, as I advise, to rotate the engine back around through...

I am in the process of a build, and this bike is completely new to me. So I will be learning quite a bit along the way. I'm somewhat wrench compatable, so I'm not too intimidated by the task before me. But I know a lot of folks may be intimidated by certain tasks until they are able to...