4 Way Waterproof Mini Fuse Block

The 4 way mini fuse block is available in both assembled and non assembled, this way you can pin the fuse block to your existing wiring. The non assembled do not come with wire unless requested.

The 4nway mini fuse block is designed to be completely waterproof and small enough to hide in any type of motorcycle build. These are hands down the smallest fuse holders available. All pin connections as well as the cap are water tight. These are all built in house and are also available as an add on option to our wiring kits to replace the included 3 inline fuses holders.

The dimensions of the mini fuse block are:

1.5in tall, 1.5in across, with a depth of 1in.

Included with the 4 way mini fuse block:

-Clear cap
-Mounting tab
-1 foot of wire per pin (1 fuse is wired with 12awg, the other 3 are 16awg)
-4 fuses (7.5A, 10A, 15A, 20A)
-All fuse blocks come either preassembled or non assembles

*wire colors may vary. There will always be 3 terminals with the same colors and 3 terminals with different colors as pictured.


Non Assembled - 17.49
Assembled - 18.99

 

10% off the site good till midnight tonight. 4/18/16. Use code "giveaway" also there is a giveaway on instagram right now @bluecollarpirate for more details ends tonight at 6.

 

Thanks for the purchase Oddjob!

The points should run fine off of the 7.5a. The fuse could also be replaced with a 10a if needed for that circuit.