For Sale - Alum. Front Hub Covers

[Beags64]

Checking to see if anyone might be interested these -
3 or 6 holes
Scotchbrite finish (on your own for polishing)
Have a few of each right now, can make more if need be
Update: $25 shipped CONUS, will work with everybody else on shipping best I can

 

[willis]

I would take a 3 hole cover. What is your paypal address?

 

[MaxPete]

These look really nice - but....what would one do with them?

Would then not eliminate the possibility of installed a front brake disk?

 

[willis]

They are for the other side of the disc on the front hub. It's a "beauty ring" of sorts.
Original thread is here: http://www.xs650.com/threads/front-hub-covers.53956/

 

[mrtwowheel]

For bikes with a single disc/rotor. It mounts on the non-disc/rotor side. Dual disc/rotors...………...you can't have one.

What type of bolt do these take, max bolt head diameter?

Scott

 

[MaxPete]

……...you can't have one.

Yeah - OK, got it Scott.

Beside, I would guess that the extra up-front weight could limit Lucille's ability to pop wheelies whenever I want to....

Pete

 

[Beags64]

What type of bolt do these take, max bolt head diameter?

Set up for 8mm SHCS - 13mm dia. head. Not sure if button heads would fit

 

[halfmile]

Will these work with a HHB spedo eliminator??

 

[Beags64]

Will these work with a HHB spedo eliminator??

Not sure, will have to check out one of Hugh' eliminators to see.

 

[cafetools]

Installed pictures?

 

[Beags64]

On a bare hub


Halfmile, cover is flush with hub spigot so it looks like spedo delete should clear.

 

[mrtwowheel]

Buyers, please give us a REVIEW, and pics.

Scott

 

[willis]

Will these work with a HHB spedo eliminator??

Just got my hub cover today. Got to say I’m very happy with it. To answer halfmile’s question, yes this works with the HHB Speedo delete. I mocked it up on a spare mag wheel and it fits very snug (photo below). These will work great on spoke wheels. The mag hubs are made different, and while it would work I don’t think it would look right. For my tracker I have an xs850 front mag which is made different than the 650 mags and will work beautifully.

 

[cafetools]

Is this very similar to the xs / TX 750 hub?

 

[Superjet]

Got mine a few days ago and will post pics once my back heals up. Real nice piece I must say. Thanks again Beags!

 

[willis]

I had my front wheel off my 75 for some brake work yesterday and thought I’d share some pics with these staged on a wire wheel, even though I will be using on my mag.

Bare wheel

Chrome stamped cap

Beag’s machined cover

Installed and mounted.

 

[willis]

Another shameless plug for Beags.... finally got my second cover on my xs850 mag wheel for my tracker. Still need to go buy some stainless hardware, but sure does look nice!!! Also notice I have Hugh’s speedo delete plug installed. No issues there.

Thanks again Beags. Quality product at a very reasonable price!!!!

 

[Superjet]

Looks good willis! I like the fork brace you got there

 

[gggGary]

Is this very similar to the xs / TX 750 hub?

It will fit work on 73-74 TX750s and all 77 on XS750-850-1100s if you are going to a single disk.

 

[MrBultaco]

Just received my hub cover. Beauiful.
Thanks Beags34, great idea and product.