Sold / Found / Inactive - BS34 Idle Mix Screw Spring and Washers

[Jim]

Putting together a set of BS34's for my run stand. Both idle mix screws are missing the washer and one is missing the spring.
Anyone holding?


Bueller.... ?

 

[Jim]

Just in case someone has loose carb parts...
Spring is a hair over 9mm long.

.... by 4.75mm in dia.

I'm guestimating the washers are 5mm OD and 3mmID.

 

[Bushyeyed1]

I don’t have any extra but mikes xs sells an air fuel mix screw set; which includes a needle, spring, washer, and o-ring. The needle is tapered so it is richer and usually set at about 1 turn out. I haven’t bought one before but niche cycle on eBay also has a set.

 

[Team Junk]

Let me see if I can find my set of 33mm from the XJ and I'll see if they're the same.

 

[Jim]

Let me see if I can find my set of 33mm from the XJ and I'll see if they're the same.

Thanks, but I got the parts on the way.