I recently changed my exhaust system to a free'er flowing system. Everything is fine while twisting the throttle up until i get to the half to full throttle area. At this point the bike loses power and starts to sputter IF i continue to open the throtle at an agressive rate.
Im pretty sure what is happening is that the mixture leans out. This is what is to be expected with free'er flowing exhaust right? or is it to rich?
In order to richen it up i need to change the position of the clip on the jet neddle right?
In order to richen it up i would have to lower the clip, thus raising the needle right?
Just double checking.
NOTE: im using dellorto phf36 carbs from mikesxs
Thanks in advance
Im pretty sure what is happening is that the mixture leans out. This is what is to be expected with free'er flowing exhaust right? or is it to rich?
In order to richen it up i need to change the position of the clip on the jet neddle right?
In order to richen it up i would have to lower the clip, thus raising the needle right?
Just double checking.
NOTE: im using dellorto phf36 carbs from mikesxs
Thanks in advance