Electrical

[Shovelhead]

Hi guys anyone know what I have to keep out of old wire harness I know I will need reg/rec ,ign box,coil but not sure on the rest here is a pic of stuff I'm not sure of kick only head tail turn thanks in advance

 

[Max Midnight]

Perhaps the question you should ask is 'can someone point me in the direction of an appropriate wiring diagram for the system I plan on using'?

 

[5twins]

The round tin part in the rubber sleeve is the turn signal flasher. You'll need that or an automotive equivalent.

 

[mrtwowheel]

Second from the bottom with the big lugs and wires is the starter solenoid, also known as the starter relay.

That unit on the bottom of the picture, I'm not familiar with that.

Scott

 

[Shifty]

That unit on the bottom of the picture, I'm not familiar with that.

Scott

Reserve lighting - post #4 explains it.

 

[azman857]

That square black thing is the automatic turn signal canceler. Throw over right shoulder into trash can. Not needed. No bypass needed. The cadmium plated oblong shaped thing is the safety relay. That can be also be not needed and bypassed, but you will have to be more alert about not trying to start a running engine.