1. Dismiss Notice
  2. Hey Facebook people... We've created a group for XS650.com members to connect. Check it out!
    Dismiss Notice

Giveaway: Pandemonium Brake Kit! (ends 11pm CST on December 17th, 2012)

Discussion in 'Shops' started by Travis, Dec 4, 2012.

Thread Status:
Not open for further replies.
  1. Giveaway: Pandemonium Brake Kit! (ends 11pm CST on December 17th, 2012)


    Pandemonium Custom Choppers is giving away a "Pandemonium Brake Kit" to adapt a Brembo brake caliper to your XS650!

    This giveaway includes:
    • The Pandemonium Brake Kit (winner can choose 34mm or 35mm)
    • Brembo Caliper
    • Brake Line
    • Nissin Brake Control Lever
    To enter the drawing post a picture in this thread of the bike you are going to install this kit on. Feel free to say a little bit about the bike.

    One entry per person. The picture must be displayed in the thread and not be a link. If you need help posting a picture see: How to Post Pictures. You must post your picture before 11pm CST on 12/17/12 to qualify. The winner will be chosen randomly from the qualified entries. Shipping will be covered by Pandemonium within the United States. Anyone worldwide is allowed to enter, but must pay for shipping if located outside of the United States.

    The giveaway ends on December 17th so the lucky winner should have it just in time for Christmas!

    Once the drawing is over, everyone will receive an email from Pandemonium with a discount code for products on their site!

    Check out pandemoniumcustomchoppers.com to see more products by Pandemonium Custom Choppers.
  2. Sub xs650

    Sub xs650 XS650 Addict

    In turning my bike into a chopper bobber it was a cafe racer

    Attached Files:

  3. MAndrade1980

    MAndrade1980 XS650 Enthusiast

    Slowly but surely getting there. Matte black, no frills bobber, soon-to-be. :D

    photo (1).jpg
  4. This is my ongoing project. Sure would look nice with that brake up front.

    Attached Files:

  5. flon3y

    flon3y XS650 New Member

    Not a 650, but soon to have 650 forks! That brake would sure finish it off nicely.


  6. tonyc

    tonyc XS650 Guru

    Here is my bike. Thanks Tony C

    Attached Files:

  7. Square Circle

    Square Circle XS650 Addict

    Pic is of me on my machine. Its a 79' with mikes xs pod fiters, re jetted to 140 main, and 35 pilot (if i can remember right) .. took some advice on the forum with tuning the 38mm carbs and swapped the stock needle for the xs400 main jet needle and shimmed it to 2.5 slot(shimmed). Did the full tune up ( timing chain adj, points adj,valve adj, The bike has some serious fun factor off the line.. I got rid of the buckhorn bars and am using the superbike bars. I plan on going to a cafe style, i have the popular cafestyle xs750 standard tank ready to go with new mounting stubs welded on. tank is in raw finish with clearcoat and a red racing stripe. i got another fender as well and that is still getting some work. I also have a second changuard that i'll be giving a speed hole treatment to. Things i want and still neeed to get: rear sets, 18 inch rear wheel, Avon tires, new chain and sprokets, 750 kit, oil filter upgrade, fork emulators, flat style fork brace,and brembo brakes, i do have Veshrah pads up front (big difference in stopping power) with a stainless line, but I still want better results. These Brembo calipers would be awesome with lighter modern rotors.

    Attached Files:

  8. DannyB

    DannyB XS650 Enthusiast

    Brat build i'm working on. Would be perfect timing as i'mabout to start on tires, wheels and brakes.

    Attached Files:

  9. slowgoin

    slowgoin XS650 Addict

    I am starting to work on my '81 XS. Extending the rear by 3", putting on a Visual Impact BRAT kit, some VooDoo Vintage 4" bars, and will be ordering a seat from POV on the site here. Doing all the welding myself, will be begging for help with Elec...lol. Hope to have it done by spring before I get deployed again.

  10. teamkandy

    teamkandy XS650 Enthusiast

    Please give me some stopping power.:thumbsup:

    Attached Files:

  11. Squint

    Squint XS650 Enthusiast

    Just getting started with my build. That front brake set up would be sweet!!

    Attached Files:

  12. deadchef

    deadchef xsbobblehead

    '81 special that needs more stopping power!


  13. speedjunkie

    speedjunkie XS650 Member

    That sweet Brembo caliper would fit my rims like a glove

    Attached Files:

  14. thelowlife

    thelowlife XS650 Addict

    Bought this thing hacked up from the previous owner so I started tearing into. I'm actually trying to get a brake setup figured out, and what better way to get a brake setup then one from Pandemonium!!

    Attached Files:

  15. Would be nice to have brakes!!!!:D:D

    Thanks for the chance!!!!

  16. Austblue

    Austblue XS650 Addict

    Mock up stage is pretty well complete but now its time to get a nice set of brakes and do some finishing and paint!

  17. Halloweenie

    Halloweenie Bearded Banjo Brawler

    Here's my XS, an '83 Heritage Special; she's not much to look at currently, but she gets me where I'm going (usually with me ginning madly inside my helmet). I bought her as a non-runner a year ago. Since then I have installed, a PAMCO and HHB PMA, UNI pods, Stebel air horn, manual petcock, tires, headlight lens and bulb, etc. One of the few things I have not upgraded are the brakes, so I could definitely use some more stopping power.

    I gave her what she needed to get running reliably, because she's my daily rider. I had quite a bit of help from several members here on the forum, for which I am very grateful. She rides strong with plenty of get up and go! I've even started collecting parts for when I really get to customizing and getting things painted or powder coated. Hell, planning my bike build is probably the one thing keeping me slightly sane at this point. Thanks for lookin'!

  18. indiaguy

    indiaguy XS650 Member

    Stop me,I don't know what I'm doing.
    I need some sexy brakes.
    Irish '81,Heritage wheels,Sportster tank,lambskin seat,lightweight battery.

    Attached Files:

  19. Dandan

    Dandan XS650 Addict

    Here is my 72 xs650 bobber. It started as a stock xs2. It was a barn find, I drove 2 and a half hours to Melissa TX (way back in the stix)to pick her up. Complete minus gas tank and exhaust. Got her for $350 with bill of sale and only 13000 miles on the odometer I think the drive was way worth it. This is how she sits now, I hope to be on the road before the end of January. This brake setup would be perfect on my bike. Sorry for the long explanation. Lol her she is!
  20. Johnt3

    Johnt3 Still learning...

    Hey, Here's my bike so far. The Pandemonium brake kit would be a cool addition to it.
    Heck I'll even name her "Pandemonium" for ya.:D

    See she needs some brakes.

Thread Status:
Not open for further replies.

Share This Page