My 1971 new addition just got ugly. I bought the bike to restore . It didn't run , but it was complete. In going over the bike I noticed problem with the advance Assembly or governor being broken.
Question ...I know the breaker shaft Assembly goes through the cam. The nut on tthe advance Assy. Does it thread onto the cam ? because that nut has a sheared off piece inside it with the keyway that turns the breaker shaft to move the points I believe.
Looks like I need a new cam, at minimum. I'm a little sick about this. I at least wanted to get the engine going. let me know your thoughts. This project just took a nasty turn.
Regards and thanks in advance,
Cpkidq
Question ...I know the breaker shaft Assembly goes through the cam. The nut on tthe advance Assy. Does it thread onto the cam ? because that nut has a sheared off piece inside it with the keyway that turns the breaker shaft to move the points I believe.
Looks like I need a new cam, at minimum. I'm a little sick about this. I at least wanted to get the engine going. let me know your thoughts. This project just took a nasty turn.
Regards and thanks in advance,
Cpkidq