Mike's Billet Front Hub

[XSLeo]

I was checking prices on some stuff on Mike's the other day and saw they are selling a Billet front hub for a 36 spoke rim. Looked very nice. A bit pricey, but most billet stuff is.
Now if they could sell a rear spoke hub for a 36 spoke rim that used a disc brake, I bet they would sell a lot of them.
If it had the spoke flanges the same diameter and spacing as the drum brake hub so it would use the same spokes as the drum hub would be great.
Leo

 

[figure8]

That is nice! Here's the link, and I agree with you about a rear to run a disc.
https://www.mikesxs.net/products-86.html#products

 

[machstang]

Cognitomoto is coming out with a spoke rear hub for a brembo disc brake. looking at about $500 for it. Spoke with Devin a few weeks ago and he was just lacing up his prototype.

 

[DrewMartin]

Run a Mikes hub with an Omars conversion for a 36 spoke rear? Or wait for the Cognitomoto piece

 

[machstang]

I just went Omar only because there was no ETA on the Cognito part. The Cognito part is sharp though. Will allow you to run stock sprocket but needs a different brake.