PRoberts317
XS650 Member
- Messages
- 12
- Reaction score
- 0
- Points
- 1
Hey gang,
Been working on my carbs a bit: They are stock, everything is stock other than pod filters instead of airbox.
Bike wouldn't really pull above 3500 rpm, so i turned the screws in a a half a turn (was at 2.5 out, turned em in to 2 out), that helped but wasn't great yet. So I turned them in a quarter more (now at 1.75 out). Idles OK, runs pretty darn good about 3000 and up, then stops at about 4500. Between idle (about 1200) and 3000 it barely wants to run, lurches, almost dies, etc.
Thoughts gentlemen, and ladies??
Been working on my carbs a bit: They are stock, everything is stock other than pod filters instead of airbox.
Bike wouldn't really pull above 3500 rpm, so i turned the screws in a a half a turn (was at 2.5 out, turned em in to 2 out), that helped but wasn't great yet. So I turned them in a quarter more (now at 1.75 out). Idles OK, runs pretty darn good about 3000 and up, then stops at about 4500. Between idle (about 1200) and 3000 it barely wants to run, lurches, almost dies, etc.
Thoughts gentlemen, and ladies??