Picked up a set of these

That's one way to do it. I just bought a set 4 of the Porsche type adjusters and modded my rocker arms. Saved about $100.
There are threads on here all about it.
Leo
 
they still are. go to the source. Grinding a relief in the arms can weeken the arm, even promote cracking if sharp edges are left behing. 5 minutes with a pointy die grinder would relieve that. btw, I have no experience with the elephant foot adjusters, but sharp corners promote cracking
s2r, are you in the north west? You seem like the type of fellow ide like to crack a beer with.
 
Thanks for all the comments/tips, will keep an eye on the adjusters.

After browsing the forum I see that there's quite a lot of sub standard aftermarket parts out there, starting to figure out who makes the good stuff. :thumbsup:
 
Back
Top