Sold / Found / Inactive - PLEASE SEE OTHER BRAT SEAT KIT THREAD

[phil240]

Gauging interest is a brat seat kit.

This is a preliminary photo as I still just have to find a shock mount to go with it.

Kit would come with both seat tubes and an insert to plug weld the new piece and the old frame. There is extra room with the tube for proper trim and fitment, obviously shock mounts and hardware will also come with kit. (Still need to find which I want to use

Will be available for sale in approximately 2-3 weeks.






Admins: If this needs to go to the shop section can an admin please move.

View attachment 183872

 

[halfmile]

What is the OD of the main tubes?

 

[phil240]

They are 1 1/8 120 wall. Tube size matches stock frame but stock frame is thinner than 120 wall.

 

[phil240]

I can also make these in 1in 120 wall or 1 1/4in 120 wall if wanted at a similar price.

 

[phil240]

I am also working on a hardtail kit that will be available in a couple months. Will be a universal hardtail kit with custom axle plates to make mounting easier than the traditional way.

These will also be available in 1in, 1 1/8in or 1 1/4in 120 wall DOM tube as well.

 

[halfmile]

1 1/8"OD X .120 wall is ideal. Correct OD and lots of material to weld too. When I did my last two frame conversions to a monoshock I searched for a 1 1/8" OD set of dies for my Mittler bender and they wanted more for the dies than I paid for the whole bike. Good luck with your endeavor`s.

 

[phil240]

1 1/8"OD X .120 wall is ideal. Correct OD and lots of material to weld too. When I did my last two frame conversions to a monoshock I searched for a 1 1/8" OD set of dies for my Mittler bender and they wanted more for the dies than I paid for the whole bike. Good luck with your endeavor`s.

I use the JMR tube bender and yes the dies are expensive. I also purchased all at 240 degrees so if need be I can bend up to 180 with no issues.

 

[Reggie B]

Is this kit available yet?

 

[phil240]

Is this kit available yet?

Response Is in the other thread
But yes available.