Maxx40x here.;I have a few parts for sale;
1> xs front hub /fzr rotors. I machined all the casting marks and the ribs off the rotor , also the nose for the speedo drive has been machined off. Will make an excellent chopper/bobber front brake assembly.
2> also have a set of Shell rods. small end has been rebuilt. big end and small end have been specked out.
3> 38mm Mikunis w/ spigots. Off my 750 Champion.
4> Shell #2 cam. Shells mile cam. Comes on really hard above 5500.
5> 19in. Akront rim. 40 hole, typical dirt track rash. Can be polished out. Nice vintage rim.
6> Also a set of stock xs forks w/triple clamps 34mm 95+%. could use freshened up. Seals etc.. Not pictured.
7> Set of aluminum TT 500 triple clamps 98-99%, 35mm, not pictured, in vary good condition. Can send or post pix later.
8> A set of R6 brake calipers, 98-99% .also no pix. Will send pix or post pics later or if wanted/needed
the site is not going to let me up-load all the pix at once. pm for all info.
1> xs front hub /fzr rotors. I machined all the casting marks and the ribs off the rotor , also the nose for the speedo drive has been machined off. Will make an excellent chopper/bobber front brake assembly.
2> also have a set of Shell rods. small end has been rebuilt. big end and small end have been specked out.
3> 38mm Mikunis w/ spigots. Off my 750 Champion.
4> Shell #2 cam. Shells mile cam. Comes on really hard above 5500.
5> 19in. Akront rim. 40 hole, typical dirt track rash. Can be polished out. Nice vintage rim.
6> Also a set of stock xs forks w/triple clamps 34mm 95+%. could use freshened up. Seals etc.. Not pictured.
7> Set of aluminum TT 500 triple clamps 98-99%, 35mm, not pictured, in vary good condition. Can send or post pix later.
8> A set of R6 brake calipers, 98-99% .also no pix. Will send pix or post pics later or if wanted/needed
the site is not going to let me up-load all the pix at once. pm for all info.