VTsending80
XS650 Member
One set came off of a '74 and the other came off a '82. Both sets have some surface rust in the bores but should clean up pretty easily. Both of them have the adjuster bodies attached and I don't plan on taking them off but I don't have the plungers for the adjusters. I actually have the pistons that go to the jugs but I have taken no measurements to check and see if the clearance is in spec. Neither of the jugs have any broken fins. The one from '74 I'll sell for $30+ shipping and the one from '82 I'll sell for $40+ shipping.
