For Sale - XS650 parts galore

[ninskrillz]

Hey y’all gotta bunch of stock stuff up for grabs. I’m located in Virginia Beach and am willing to ship all of the stuff at the cost of shipping. Most stuff I’m letting go cheap and an open to offers.

I’ve got a 79 special that I’m keeping the frame, motor and exhaust from. The rest is for sale and is 98% there.

I also have a frame with a S650 vin that I was told is an XS1B frame as well as a motor and early disc front end. I would like to get 400 for the frame and motor or 200 each. No title on the frame.

Comment or PM for inquiries or offers. Thanks!!

 

[ninskrillz]

Dunno why the pictures are getting turned but you get the idea

 

[Cafe Murdock]

How much for disk an beacket n caliper on front

 

[ninskrillz]

How much for disk an beacket n caliper on front

Don’t have any front calipers unfortunately- which disk do you need?

 

[ORIGIN_G80]

Do you have a complete wiring harness?

 

[ninskrillz]

Do you have a complete wiring harness?

Yeah but it’s showing it’s age I’m sure

 

[ORIGIN_G80]

How much? A lot of the wires on my bike have been cut by previous owner.

 

[ninskrillz]

How much? A lot of the wires on my bike have been cut by previous owner.

40 shipped?

 

[Sudonate91]

What year is the frame with the spoked wheels? How much for the back wheel/tire/sprocket (everything wheel related really)

 

[member28833]

Sudonate91, that rear wheel appears to be on the early frame, Likely an 18" . You should investigate further if you'd like to pursue an 18" rear rim or a 16" from a later "Special"

(Drum brake ?)

 

[Sudonate91]

Sudonate91, that rear wheel appears to be on the early frame, Likely an 18" . You should investigate further if you'd like to pursue an 18" rear rim or a 16" from a later "Special"

(Drum brake ?)

I would be looking to replace this non stock wheel and bits on this bike I just inherited http://www.xs650.com/threads/my-reb...me-identify-this-650.58517/page-4#post-672181

I was hoping it would work.

 

[ninskrillz]

What year is the frame with the spoked wheels? How much for the back wheel/tire/sprocket (everything wheel related really)

Keeping the 18 rear

 

[Cafe Murdock]

Don’t have any front calipers unfortunately- which disk do you need?

Left front set up

 

[Drizzle]

I'm looking for a 79 front left lower Fork shipped to 37914

 

[ninskrillz]

Left front set up

Early or later style?

I'm looking for a 79 front left lower Fork shipped to 37914

I’d prefer to sell the whole front end as a set, let me know if you’re interested.

 

[Drizzle]

I'm not interested in the whole set. Thanks anyway.

 

[Stelvio NTX]

I am interested in the instrument cluster with ignition switch, headlight with brackets and an ECU unit for my 79 model

 

[ninskrillz]

I am interested in the instrument cluster with ignition switch, headlight with brackets and an ECU unit for my 79 model

100 shipped sound fair?

 

[Stelvio NTX]

That sure sounds fair, can you tell me the condition of these parts.Are they going to be usable as is or will they need a lot of work?
You know I'm new to these xs650's .I just got the bike ,and I've been looking things over on the engine,I pulled the cam covers off one on each side of the head fully expecting to find points or an electronic ignition on one side and spark advance on the other.What I got is nothing, there is an empty hole going through the cam shaft with nothing connected to it, am I missing something? Or is this 79 model different from the earlier models.
There is so much missing from this bike,I may have you ship me your entire parts bike,just kidding,I noticed in your picture you have the switch gear and levers,I need those,I could use the clutch cable, and throttle , speedo and tach cables.
I also would like the older set of side covers you show in a separate picture,they say OHC 650 on them.