IMG 31- Install 3 of the springs in the steel plate, the smaller spaces, before attaching to Primary Drive Gear.
IMG 28- Don't install springs next to each other, like this photo. Just install 3 springs into the smaller spaces, every other opening.
IMG 29- Make sure spring is all the way in the pocket, with flat side of spring compressed against both sides.
IMG 30- Carefully pocket springs on their flat side surfaces.
IMG 31- Install 3 of the springs in the steel plate, the smaller spaces, before attaching to Primary Drive Gear.
IMG 32- Primary Drive Gear, flipped over to show spring placement.
IMG 33- Install 3 of the new springs, in the primary drive gear.
IMG 34- Steel spacers, install with the wider side up, against the steel plate.
YAM277

IMG 31- Install 3 of the springs in the steel plate, the smaller spaces, before attaching to Primary Drive Gear.

There are no comments to display.

Media information

Album
Cush Springs / Dampening Springs Guide for Replacement
Added by
YAM277
Date added
View count
478
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top