IMG 38- Red Permatex or Red Loc-Tite
IMG 35- Better shot showing the spacers, before the steel plate is fastened.
IMG 36- Steel plate laying on the primary drive gear, with spacers showing below the hole.
IMG 37- Try to angle the cut on the adhesive tip, for better control, when applying the product.
IMG 38- Red Permatex or Red Loc-Tite
IMG 39- Let gravity take it's course around the threads, lightly applied.
IMG 40- 13mm socket used on the backside.
IMG 41- 5mm Hex Bit socket inside clutch housing and 13mm socket on the back of the primary drive gear. Torque specs were just hand tighten snug, with
YAM277

IMG 38- Red Permatex or Red Loc-Tite

There are no comments to display.

Media information

Album
Cush Springs / Dampening Springs Guide for Replacement
Added by
YAM277
Date added
View count
491
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top