XS650 1977 with 74 GPz550 monoshock

XS650 1977 with 74 GPz550 monoshock

how is the mono shock mounted to the frame?
The shock is attached to a modified rear motor mount. It doesn't have to be too much different than the original XS mount, just extended backward to mount the shock. The lower suspension arm is attached to a very strong bolt attached to the original jack-stand supports. I used a bolt with a stainless sleeve over the bolt .
The dog-bones fit just fine unless you want the bike to sit higher or lower.
The GPz550 swing arm bolts into the frame just like the original XS650 swing arm.
I ain't kidding, this is one of the most obvious mods for the x650.
The forks fit well but had to get 2 sets of Magna head bearings to use the larger of the two with the R! forks triple tree.
I also used a Ninja 600 shock but even a Ninja 250 shock would work well but not have the tech....

Media information

XS650 Bobbers
Added by
Date added
View count
Comment count
0.00 star(s) 0 ratings

Image metadata

94 (2).jpg
File size
162.8 KB
1209px x 907px

Share this media