AlanW

So after following advice I removed brake shoes and reassembled. Free as a bird. Took a look at the shoes - they are brand new from...

Good advice! Once again this group comes to my aid! First thing I’ll try tomorrow. 👍

I’ve become an expert, thanks to all the help on here👏 on removing and installing the back wheel!! So, new day tomorrow. Remove...

This is what mine looked like and I made sure it went back on the same. ??

Great advice -thank you. 👍

No haven’t changed the bearings. Only delta is the new brake shoes. I took it all apart and reinstalled this morning still binding when...

All back together, new chain and sprockets on. Wheel ran free. Set the chain tension and tightened up rear axle nut, wheel “stiffened...

That’s great - thanks again!!

So I’m re-installing the rear wheel on the ‘75 and the chain adjusters are different for left and right. One (left?) has a smaller...

Thanks - that’s great. Was after front sprocket and rear wheel axle. Appreciate your help - as always!

Sorry if this has been asked before - I’ve looked in the technical stuff in the Garage for a list of torque settings for various bits of...

Fitted new brake pads up front without the shims - they seemed to rattle?…, re-fitted wheel with fresh Bridgestone BT 46 rubber. New...

That’s great - thank you - I’m not the most proficient at this stuff but I’ll go through it bit by bit as suggested. That’s why I...

Worked a treat! Thanks for the advice. Only trouble is I need to replace sprockets and chain cos they’re worn. Might as well put new...

Well, even I can follow those detailed instructions! Thanks very much for the response. 👍

Thanks for the reply. I’ll give it a shot using your technique. Much appreciated.

Ordered new tyres for my ‘75 model and will remove wheels before taking them to local bike shop for fitting. Haynes manual says to...