A

arcticXS

Top Contributor
XS650 Guru From Tromsoe, Norway
Joined
Last seen
Messages
2,401
Reaction score
4,109
Points
263

Latest activity Postings About

    • A
      arcticXS replied to the thread Modern frame for an XS650SE.
      If Fritz Egli is still around, look no further...
    • A
      arcticXS replied to the thread Public Service Announcement Dont Use Masking Tape.
      Denso tape (grease tape) used to protect hydraulic fittings etc from corrosion would work great, both for corrosion and any mechanical...
    • A
      arcticXS replied to the thread Fork Tube Interchangeability.
      Except for the brake calipers. Yamaha did a pretty large step backwards from 76 with 2x48 mm caliper pistons to a 1x38 mm piston in the...
    • A
      arcticXS replied to the thread Suzuki or Yamaha ?.
      Agree, fuel tank is definitely Suzuki. Those 4 valve aircooled 400 twins were actually quite fast. Most likely faster in the quarter...
    • A
      arcticXS replied to the thread Question about exhaust.
      Dzjeez....A gap that size is "meant to be there" Not exactly impressive engineering. Neither is that rather thin and basic steel flange...
    • A
      arcticXS replied to the thread XS 850 Re Model.
      I have had pretty good success with using Torx bits as screw extractors. Just drill a slightly undersize hole and tap the Torx bit in...
    Show older items
  • Loading…
  • Loading…
Back
Top