BluzPlayer

The head that kick started this is Garrett's (@wannabridin ) D Port. I took baseline testing of the stock heads and Garrett's D Port at...

I realize that many are simply more comfortable when looking at CFM numbers. I created a graph for comparing the various tests I have...

I've often found that sometimes charts are easier to grasp that simply posting numerical values. I've picked up on some basic...

Hey Signal, Yea it got me pretty good. Much worse than the one that shut down the world did. I am happy you are able to get something...

Welcome Back... Welcome Back. Been more than a minute. Unfortuanately I caught a bug and have been out of action for a bit over 10 days...

Got it. Disregard.

Laying down on the job.

Been a minute since the last update. Been busy though and getting a few things done. Wife's eye is improving on track and should soon be...

Have the calibration procedures dialed in. Extremely confident that the accuracy is above 99%. Closer to 99.5%. The calibrated plate I...

Since some of the changes I am evaluating may be relatively small individually, I have been attempting to tighten down the accuracy in...

Scootin little scooter...

Stock Head Pocket Port.. Preparing to test to make a determination on potential gains from simply cleaning up the port area and adding 3...

The epoxy has been removed from the D Port. I will begin modeling the port with clay while simultaneously testing until a design is...

Taking a look at the delamination issues with Garrett's D Port built by Hugh. I think it is worth noting that there are no apparent...

Gorgeous build with a scheme that is not common. The flipped scallops are subtle yet effective at making the bike stand out. Especially...

Just an overview of the basic porting ideas and concepts along with the 5 Golden Rules I follow. Comments, thoughts, ideas, and or...

You know what's up.... More vids coming VERY soon.

Interesting Signal... I need to measure the radius on Garrett's D Port; but whatever it is, I am thinking it is too tight. Finding a...

Beautiful bike!

More numbers.. One of the objectives in porting is to maximize the use of the entire valve moving air into the chamber. At higher...

Flowballs... What are they and what do they do? They are used to help identify air flow through a port when mapping that port. Combined...

Well I found the smoke.... Stock Head at .2 @ 28"