CD15

I'd love a Boyer system but they don't just sell the ignition itself and I'm not inclined to drop $350+ cDN when I already have a nice...

I have been in contact with them, just recently, a Paul. They have them up for sale on fleabay, a few now actually.

Thanks Gary, so with respect to the Mikes which works best for an 83 xs650 with a hughs handbuilt PMA and running a battery, still kick...

Hi All, I have used the search button quite a bit with this one, didn't find a direct comparison especially now that Pamco isn't...

Sorry Wingedwheel last question, I think. I am in Canada so this would get to me sooner, would this one work, does it have all the...

There is the gear in the upper left of the pic attached. I look on YouTube found at the end of this video once buddy took off gear that...

Why are guys saying that the crankcase needs to be split, I didn't think that made sense looking at the set up.

Fantastic, so no having to split the cases just drop this right in and set in place then attach electric starter motor and wire.

Oh man this is good news. So I just found this on eBay asked the seller if it's everything I need minus the electric starter motor which...

That is great to hear wingedwheel, really good. Is it a fairly straightforward job? Just need to source the parts.

Its on the left side, seems to be the float bowl, small, slow leak.

Thanks Jim, I really appreciate the insight. So the static is good enough to get me fired up, hopefully no kickback (bad past experience...

Hey Guys, just noted that have a small leak from the carburetor as well. Will this effect start up, kicking it over or can I still get...

Thanks Jim so my dad and I timed it based on top dead center and the electronic ignition all syncing up together. Are you saying I...

Thanks JohnDaddy, so you won't typically see kickback on an xs unless it's too far advanced spark. I would assume that with the bike...

Hey Guys, so unfortunately nothing is in there so means I have to source it and then split the crank cases, what a bummer. Or, I run it...

Thanks, hoping not, here is what it looks like. I have the electric start motor.

Hey Guys, where can I buy the gearing for the electric starter motor. Looking online and can't source anything, eBay has some guys but...

Hi Guys, ok so looks like we are right down to the last bit of electrical. I wanted to bounce hopefully one last question. I am afraid...

Thanks Jim, much appreciated again.

Thanks Jim appreciate the insight. So would I need resistor caps? The current caps are a TD-134 and my spark plugs are NGK BR 7ES. I am...

Hi Guys, Need some help. I purchased the following coil from MikeXS and didn't realize it didn't have the caps connected so my first...

Thanks for the replies guys! I just purchased the Tytronic about 3 months ago directly from there Ebay site. I am hopeful this whole set...

Thanks Jim, always appreciate your insight!

Here is a better pic of the coil.

Hi Guys, I am in the middle of doing the electrical on my 1983 Yamaha XS650 chopper build. I am almost complete running all the new...