Charles13

I think she is really liking the 350exc

All those countries north of her are kicking out the French governments, the head quarters of Niger’s French ruling party is in flames...

I think the majority of the damage was done before that as he showed her the cush rubbers where also toast.

I forgot about the 5th od! I’m going to add one also. I use a Cush drive KTM wheel with a 19” Sun rim and 39 tooth sprocket, the axle...

There is a Mercedes supercharger check valve that high revving single cylinder Supermoto race bikes use with great success

I’m constantly amazed at all the women carrying huge loads on top of their heads and, they can constantly turn around and look at stuff...

I had an 19” Sun rim custom laced inside/inside to clear the calipers on my stock 43mm r6 front end

These really complete the effect that the torque inserts start effectively increasing the overall velocity, not just out of the head...

$830aud or in my case priceless as I want to run a Cush drive wheel Sun rim combo that can only go down to a 38 tooth sprocket. A Cush...

And cars and trucks! Some of those vehicles had loads twice as high as the car

They seem very well built but they use a pretty wide radius on the head pipes.

Update; I’ve got the gears they where sitting in quarantine at the post office

Ivan, contacted me and it appears that they may be in a holding cell at the post office for duty owed. I’ll be going there first thing...

Pictures and how you did it may encourage others to attempt the same mod.

I haven’t received my gears and the tracking number is invalid, the PayPal invoice was to Carynn McCann for $830 AUD. I have emailed him...

Just got mine, very quick service! Now I just need Ivan’s primary gears to show up

omg. That’s too sad.

I need a bunch of cracked sockets replaced so, ya I’m in

Thanks Travis, I just ordered mine this is a very cool product!

Absolutely gorgeous and I understand the wheelbase is in spec but, the fender needs to be longer or the swinger shorter or something.

I went to DeLaSalle in the early 70’s it was quite the experience!

Thanks I like that, they will be perfect. What are you using for heat shields? and how are you bolting them to the head? Stock flanges?

I didn’t see any high left side systems on there maybe they are sold out. The Mac systems are 13/4” head pipes that are too big for my...

That Delkovic pipe is good value and would look the part with a big megaphone. I wonder what the head pipe diameter is? It says stock...

All the parts are coming together for my new street tracker build but I’m stuck on an appropriate exhaust for my application. The motor...

Where did you source the sump? There was a girl on here that I was trying to get one from but she just faded away.