halfmile

Those figures were just what I was thinking. I`ll split the difference and go $4950. :laugh::laugh:

Thanks William. That sounds like good advise. I`ll give it a little more time. Your right about FB. Sometimes it`s just cheap...

I`m going to part with this motor. Looks like a piece at a time. I do plan to advertise this on some FB sites because I haven`t dealt...

If your rear sprocket is to be flush with the hub the front sprocket would need to be flush with the end stop on the splined shaft. I...

Somebody really needs to be all over this one.:yikes: Lots of good parts.:thumbsup...

This thread reminds me of my Go Kart Glory Daze. You can never have too many ports and the Dremel never cools off.

I plumbed up the oil cooler. I broke one of the 90 degree fittings but I had a spare. I had to make new lines since I cut up the last...

I spent Christmas making a couple of brackets to mount the oil cooler I removed from my first tracker and LSR bike. Might as well put it...

These have been on FB for 27 weeks. No idea what they fit but $40 seems dirt cheap for new magneto`s. What are they for...

Here`s some inspiration. Not that you would ever need it. https://www.facebook.com/watch/?ref=saved&v=836090215801816

I think JEMCO makes a megaphone similar to the Shell one`s Gary Hoos used to make.

Wheels have been sold.

BUMP Sold my last 19" wheel so it`s time for this kit to go.

Yes. They have been sold.

Today I test fit the rear wheel assy and new longer brake stay. I also made little plates for the fork stops. The swingarm is going to...

Looks like a very useful piece of equipment. I`ve been looking at the HF 30" slip roller. I just need that 30% off coupon.:thumbsup: On...

I found a chrome plater in Cuba Mo. Highline Plating. Only $650 and they have a 3 Month turn around.:yikes::yikes::yikes: Give me a...

Took the swingarm to the chrome shop and their nickel tank is down so no plating at this time.:mad::mad: I tried every shop in Kansas...

The price is right!:thumbsup...

This came up on the net today. Don`t know what it is but that engine turned aluminum is as classy as it gets.:thumbsup:

The swingarm is TIG welded and polished and will be at the chrome shop bright and early Mon morning.:thumbsup:

Got this tacked up yesterday. Still have to make tabs for lifting spools and dress up all my MIG tacks then it`s off to the TIG...

I got the tire clearance figured out without cutting the swing arm brace. No ornament here. This puppy has been around the block twice...