phil240

Candy applied Clear again in a couple days

Next phase of sanding is done. I'll lay out my lines tomorrow hopefully. Used a 320 grit sponge. Few imperfections but considering...

Update From the bare metal worked back up to flake and cleared it last night Checked it this morning and night and day difference So...

For anyone that's been following I tried to touch up the candy in a couple spots and it started to react and wrinkle. So back to bare...

Still without the 2k clear or sanding, but out in the sun to cure a bit. Like I said the layout and lines aren't perfect but...

Still have to do the 2k clear Decided not to use the almond on the fender or tank. All rattle cans. I'm happy with it.

Next up Rootbeer panels Outlined by the flake Other area filled in with the almond to accent it Then a real 2k clear Hopefully all goes...

Sanded the clear and did another flake for good measure then cleared again Couple days I'll sand and lay out my panels

Here's my review Yes it's pretty simple to just make these out of metal, but if you're not in a rush these are perfect. They are worth...

I'll be chasing out all my threads before assembly

My fender needs a second coat, but have to get more flake. Tank has clear and will be sanded so I can set up the panels and candy it...

Rich found some more stuff. These are from a running bike that had bad rings. Head $75.00 without cam $100.00 with cam plus $32.00...

I could make one out of chrome molly if you wanted. Shoot me a message and we can talk more.

I am not affiliated with the YouTube links I'm about to give. But I found these 2 videos helpful for how I'm going to paint the rest of...

And Rustoleum glitter for the flake Clear coat is up tomorrow

Cranks from running bikes $45.00 plus shipping New headlight $20.00 plus shipping Seat springs both $10.00 plus shipping Right peg...

It's not chrome molly. It's .120 wall DOM 1x2. Axle plate was designed by myself. It's the prototype. Also the brat seat portion is...

Trying my hand at painting the tank. So far primer and black base is on. Attempting to do a homemade metal flake with some candy all out...

Just about ready for testing.

Nope But if you are in any of the Facebook groups a guy by the name of Mike pec has a set of carbs for sale.

Painted and going on for testing

Let me check with my partner. The parts are by him. I know he posted them other places. I'll message you tomorrow.

nice work

I did reinforce all joints with extra plate. If you are in any of the Facebook groups you have seen this already, but I know some people...

As you guys know I had been making an extended swingarm. The prototype is with my partner and going onto our brat build for testing...

Kits are still available if anyone is interested. We make to order.

Kits are still being made per order if anyone wants

messaging you. was just about to cut ones but for the price I'll save the time

If you are on some of the Facebook groups you'll see my partner has posted these as well. We are giving these parts 1 week. If not sold...

Well time for an update for you guys since it's been a while since I posted. Bike was moving along in my spare time. Made a electronics...