SEd27
Reaction score
377

Latest activity Postings About

    • SEd27
      SEd27 replied to the thread So I wasn’t crazy after all….
      On a related matter, I was planning on coating the spoke threads with anti-seize to prevent galling. Do I need to also apply at the hub...
    • SEd27
      *Warning* Longish Post…. I have been running XS Performance rims and cad spokes on my Special for a while now. When I originally laced...
      • IMG_0061.jpeg
    • SEd27
      SEd27 replied to the thread 650 Special brake caliper upgrade.
      I have this set up...
    • SEd27
      Getting ready to replace the cam seals. Don’t ask me how much I paid for the o rings at the local Yamaha dealership. There seems to...
      • IMG_0025.jpeg
    • SEd27
      Finally bit the bullet and changed out the original glass fuse box for a modern blade unit from cycle terminal. There wasn’t enough...
      • IMG_0011.jpeg
      • IMG_0012.jpeg
    • SEd27
      SEd27 replied to the thread Front disk brake lever movement..
      How did you bleed the system? Another trick I picked up on the forum was to pop the master cylinder cover and zip tie the brake lever...
    • SEd27
      SEd27 replied to the thread Front disk brake lever movement..
      Others with more knowledge than I can chime in, but I think you master cylinder might be too large for a single disc. Have a look at...
    • SEd27
      SEd27 replied to the thread Carb dumping fuel.
      Had this happen a couple years ago at the start of riding season. I took my smallest dead blow hammer and tapped (very lightly) a...
    • SEd27
      Does anyone have the part number for the universal Uni pod filters for the VM34s? I was cleaning the filters today and discovered one...
    • SEd27
      SEd27 replied to the thread BP7ES Plugs Discontinued.
      These are difficult to find off the shelf in Canada. Tried a few parts stores over the weekend (including Napa) and they were all...
  • Loading…
  • Loading…
Top