T
Reaction score
83

Latest activity Postings About

    • T
      Thursty replied to the thread Exhaust.
      I also have a set of cheap, emgo shorty's. The sound at higher rpms is ok, but idle is super quiet. My uncle suggested modifying the...
    • T
      Thursty replied to the thread Exhaust.
      First thing I tried was a cheap $10 emgo silencer, that I would say is similar in functionality to your homemade baffle. I started with...
    • T
      Thursty replied to the thread Back working on the bike.
      Copy. Will do. I'm gonna order up to 137.5 mains. I also have 30 pilots. Next time I take things apart, I'll try a 135/30 combo just for...
    • T
      Thursty replied to the thread Back working on the bike.
      So I did not have any propane or acetalyne on me, so I went with carb cleaner for the time being, in order to check for a leak at the...
    • T
      Thursty replied to the thread Back working on the bike.
      Will check for leaks at the intake first. Then go from there. Any recommendations to testing intake leaks?
    • T
      Thursty replied to the thread Back working on the bike.
      I'm currently @ 27.5 pilot, and 132.5 main. Do you think it's ok to go bigger yet? Again, they are 76 bs38's
    • T
      Thursty replied to the thread Back working on the bike.
      I will also note that the plugs are quite new. Gap is set correctly.
    • T
      Thursty replied to the thread Back working on the bike.
      • PXL_20221107_013602416.MP.jpg
    • T
      Thursty replied to the thread Back working on the bike.
      I rode the bike 12.5kms today. These were the plugs following the test. From what I can tell, that reads super lean doesn't it? Bike...
    • T
      Thursty replied to the thread Back working on the bike.
      Based off of my recent findings, I believe you're 100% correct. Too lean. And I wonder if your right that the initial start-up and...
    • T
      Thursty replied to the thread Back working on the bike.
      Do you guys think I need to take it for a good run? I don't think I've ran it more than 4kms in one run since I've gotten the bike. Lots...
    • T
      Thursty replied to the thread Back working on the bike.
      Oh gosh... I feel like I've tried everything. Ignition system: I've replaced majority of the ignition system. Coils, condensor, points...
    • T
      Thursty replied to the thread Back working on the bike.
      https://www.xs650.com/threads/first-motorcycle-and-a-cylinder-not-firing.62744/
    • T
      Thursty replied to the thread Back working on the bike.
      Right, weaker running cylinder. The right side carb was seized due to varnish when I acquired the bike. I am currently cleaning it once...
      • PXL_20221105_234957208.MP.jpg
    • T
      Thursty replied to the thread Back working on the bike.
      Left, stronger running cylinder
      • PXL_20221105_235021247.MP.jpg
    • T
      Well, it has been a minute since I was last active, and thanks to the business of fall as a bricklayer, I haven't been able to work on...
  • Loading…
  • Loading…
Top