T
Reaction score
11

Latest activity Postings About

    • T
      Tone replied to the thread My 75 won't start..
      Yes, I neglected to mention that carbs were full of fuel. I have in line filters also so you can see the fuel flowing when the taps are...
    • T
      Tone replied to the thread My 75 won't start..
      '''The pin can't go missing as long. As the points cam is in place and the advance unit is not removed. Just not possible unless the...
    • T
      Tone replied to the thread My 75 won't start..
      The pin can't go missing as long. As the points cam is in place and the advance unit is not removed. Just not possible unless the...
    • T
      Tone replied to the thread My 75 won't start..
      The fast cranking can be explained by a 13 volt fully charged new battery, overcharged if anything. Rebored engine with new pistons...
    • T
      Tone replied to the thread My 75 won't start..
      13 volts from 12 battery is not low. Each cell of a good fully charged 12 battery is 2.1 volt there are 6 cells that is 12.6 volts a...
    • T
      Tone replied to the thread My 75 won't start..
      Everything was done at the same time the motor was rebuilt new plugs points condensers coils pods carbs floats jets valves and so on...
    • T
      Tone replied to the thread My 75 won't start..
      i did try swapping spark plug cables same problem won't start
    • T
      Tone posted the thread My 75 won't start. in The Garage.
      The engine has been rebuilt, rebored, new pistons crank rebuilt valves reground, New advance unit new points and coil new condenser good...
    • T
      Tone replied to the thread O ring placement..
      Thanks, but to small with an ID of around 1/8''. I never saw O rings that small when I stripped it, I thought maybe an XS1 or 2?
    • T
      Tone replied to the thread O ring placement..
      I've just discovered the 2" O rings go behind the points/!advance buckets. The only place I can find for the 7/8" 0 rings is the the...
    • T
      Tone posted the thread O ring placement. in The Garage.
      I have a new gasket set, included are some O rings. I know where most of them go, valve covers, barrel, etc, but there are a few that I...
      • WIN_20240824_10_50_21_Pro.jpg
  • Loading…
  • Loading…
Back
Top