Zmccleary7

The trip down to Colorado Springs to pick up the newest member of the family 1993 Yamaha seca two 23,000 miles garage kept entire life...

First day at the BRC and they have us on TW200’s and XT250s(photo of the one I’m on) quick little things.

no the timing light is this paychecks purchase, The issue being ill need to start her before I could use it. Ill pop the top cover this...

alright 2 days on and she's still a bugger to kickstart, takes anywhere between 10-20 kicks to start. Additionally on occasion when I...

SUCCESS!!!!🎉🎊🎁 after a lottle tinkering with the carbs she fired right up, she idles high on both chokes, and bogs on one then of course...

Ahhh makes sense, I re-wired the set up to the coils then back to fuse box instead, as well as the wiring between the coils themselves...

So heres the current wiring from the dyna to the coils. I have the orange and grey from the dyna leading to there respective side then...

Another diagram to add to the list. For a simplistic build nothing crazy, but with extra space and availability to add accessories and...

Yeah it looks like I may have hooked my coils up incorrectly, i hooked everything up and she wouldn't start, surprise the batteries half...

I did yes, i labeled both ends of wires when I unhooked them and then followed the same steps just in reverse🤷🏻‍♀️

I have the red ignition wire from the dyna hooked to the fuse box then everything else led back to the cdi or up to the coils then the...

Additionally i have the positive wire from the reg/rec aswell as a 20amp holder which Im guessing connects from the battery positive to...

So in that case I should hook the brown wire to the end of my fuse box or the red ignition wire??, and ignore the capacitor in the...

I’m in the process of wiring today and following the wiring diagram I can’t seem to figure out what the brown wire goes to??? Red for...

Huge shout out to @Jim for assisting with the pulling of my rotor!! This weekend will be(Finally!) the days of attempting the re-wire.

So the keihin carbs have issues with dropping jets?? The flat side carbs seem to a good option as well, although of course on the pricey...

Unsure if this is the place, but does anyone know the size of carburetor for a 1973 honda XL175? Some websites say 24mm then some say...

Photos for thread reference. The puller wont even thread on tightly, its looser than street walker on Saturday night.:mad:

You bet🫡

Yes sir! straight from the link uptop in thread. To add fuel to the fire. took em an extra week for it to arrive to the house.:mad:

So we attempted to use the rotor puller on my lunch, we tightened the outer part to the rotor then started tightening down the inner...

heard and noted🫡