Sold / Found / Inactive - Plenty-o-parts

Bushyeyed1

Cafe Racer
Top Contributor
Messages
845
Reaction score
1,448
Points
143
Location
Wahiawa, HI
B7DC6EE9-4416-4A9A-9E0F-FB67D153F266.jpeg
I have lots of parts sitting around since I sold my baby. I have lots of gaskets, jets, seals, and hardware not pictured. Also some engine parts also not really visible in the picture. I do have a spoke 19” rim without spokes or hub too. I will do lot sale discounts if you want a grab bag kinda deal on all the hardware if you just want to send it to a better place. I will ship in flat rate usps boxes so if it fits it ships. International we can get an estimate on shipping. P.S. the side cover with the sight glass has a hole in the oil line plumbing so will need to be repaired.
 
Last edited:
How about those round mirrors? They in good shape? Restoring a 73 and looking for mirrors.
 
They are two different types, but in good condition.
 

Attachments

  • image.jpg
    image.jpg
    268.7 KB · Views: 126
  • image.jpg
    image.jpg
    223.3 KB · Views: 125
The oil filter is used, the light box has the carb diaphragms and springs in it, and yes all the valve train parts are stock.
 
Whats up with the right side cover..all the way on the right? Looks fun :D
The right side cover I had shined up getting it ready to install a oil cooler, but I inadvertently drilled into the oil pump line flow of the casting. Not sure but might be something that can be welded.
 
The right side cover I had shined up getting it ready to install a oil cooler, but I inadvertently drilled into the oil pump line flow of the casting. Not sure but might be something that can be welded.
Oh......lol... So I take it that the stainless braided lines and what looks like the oil cooling grate was for that project? Would you sell the lines and oil cooler grate?
 
Oh......lol... So I take it that the stainless braided lines and what looks like the oil cooling grate was for that project? Would you sell the lines and oil cooler grate?

yep that was the next project I had in mind. I will sell the oil cooler, braided lines, and connectors for $50 shipped to US.
 
That is where I was going to mount it. I can’t remember if it was in ailment with the holes. I think I was going to fashion some brackets.
 
@redracer They are bs34 carbs and the diameter of the filters are 55mm-57mm which fit Bs34 carbs. The filters haven’t been oil’d and were only mocked up for a short time. The carbs need some love; one side is in fully operating condition. The other side will need a new throttle butterfly holder bar or a re-tap. It will probably also need a bleed jet and the normal rebuild stuff. I will throw in the carb holders and any needles, jets, any other gaskets or carb hardware I have; $60 shipped to the U.S..
 
Last edited:
Just an updated price list including shipping to U.S.
-BS34 carbs, holders, jets, needles, and anything extra I have for them - $60
- Uni filters (practically new) - $25
- EBC rear drum brake pads (new) -$30
- oil pump $20
- complete set of valve springs and hardware $25
-19” front rim without spokes or hub -$25 plus shipping.
I have more stuff so if you just need something PM me and I may have it laying around.
 
Last edited:
Back
Top