For Sale - For sale .. inventory including reconditioned and rebuild bs38s and 34s and more parts coming

l
IMG_20201121_210915.jpg
IMG_20201121_210911.jpg
IMG_20201121_210020.jpg
IMG_20201121_210037.jpg
IMG_20201121_210041.jpg
IMG_20201121_210046.jpg
IMG_20201121_210052.jpg
IMG_20201121_210105.jpg
tank has one tinny ding on right side near knee..little to no rust.. has both tank badges is excellent condition...real close to being ready to paint... NO KEY.
 
I've been in the garage alot during the rain...and I've finally unboxed a bunch of parts in my new place... I will be listing alot here this winter to fund the build I'm working on now... If your interested there are two sets of the last gen bs 38s that have full rebuilds already done on them and never had fuel in them(Japanese rebuild kits not junky ones) they have soft diagrams and I will post videos' of them holding vacume for those interested...that have alot of love put into them and are ready to rock!View attachment 178563 ... And lots of factory parts are getting unboxed this month..

Interested in those fish tails.
 
here is a video I made to show the tank in better detail, I think MR Pete has dibs on it.. but I woul dlike some feedback on how the video looks on your guys end... any critisism is welcome and apreciated, I want to display and describe things to the best possible...... I buy alot of used parts, well we all do when we have vintage and antique bikes, and I usualy have good luck, but sometimes you get something that, is "condition unknown" lol thats what someone puts on ebay when they know the condition is SHITE!!!!!!!!!!! but they just dont care or want you to know, I promise that anything I sell is in useable condition, and if I list it as rebuilt or remanufactured than it is as good as NEW, anyhow right now the fishtales are sale pending, I will update if it falls thru,

I also have a lathe and a milling machine with boring bars and power hone, so anyone that wants Machining work done I can do it for you at a discount of a shop with a overhead, I do it for fun and a hobby, but I am professionally trained and am a perfectionist so the work will most likley come out better than the shop that just cares about the tottal of the bill... Im experemanting now with surfacing a head and using a thinker MLS head gasket, that will slightly raise the compresion due to surfacing the head, but then the MLS multi layer steel head gasket will bring it back down, (BUT) what im looking to achive with this experiment is to increase the "Squish Band" that way compressing the begining of the gasses twards the spark plug and flame front with sa bit more velosity. ony reserch and development will tell weather this is a benifit, BUT ya anyways, if you want a cyl bored out for the 700 pistons I can do that, I may do one to have eady to send and just do it on a swap out bassis, unless you really are conected to yours... ok thanks yall also tig welding on casses or side covers avalible, if you can imagine it I can do it.
APcustomcycles and fabrication
 
sorry to all thouse who thought I disapeared , I had a flood here at the mountain home i recently bought to live in and itss just now under control...... I was originaly going to deactivate this listing tonight but I have manymany PM messahges asking for diferent parts and I know when I need something and someone out there has it I gottta habe it, so Im going to try again, I gavbe my personal v=cell to many who I habe allready been comuniov=cating via PMs, so that we can expediate this process,,, Im no salesman by any means and Im just trying to pass oin parts I wont be udssing , so bare with me, and if this go round goes as baddly ad the las=t then ill just give up and deactuivate the listing for everyones sace, Im mainlh on thif fot=rum for thr frienf=dship so I dont e=want to ruin that with some clasifieds problems
 
Back
Top