need abrasive ideas

Sheet metal screws? :umm:
Pointy... #4 by 1/4" length should get into the pits. 20 bucks or so gets you a thousand screws. Might be worth a shot...


1677685459354.png
 
Jim said:
Sheet metal screws? :umm:
Pointy... #4 by 1/4" length should get into the pits. 20 bucks or so gets you a thousand screws. Might be worth a shot...


View attachment 236634
Click to expand...
Hex head sheet metal screws have sharp areas on both ends...........
Screw for attaching pole barn tin.
1677686181872.png

I can't count how many holes I've stuck in my fingers handling those SOB's
 
Quaker Houghton Rust Veto, there are various formulations and sizes available
 
bosco659 said:
Just read this. Says Evaporust isn’t a long term rust prevention product.


https://www.theruststore.com/How-to-Use-Evapo-Rust-W28.aspx
Click to expand...
If it's going to sit empty, you can buy WD40 in gallon size (I do) and put a quart (liter to ya'll furriners), shake it up and strain it back into the can. Should be good for quite a long time. If the bike is in storage, fill 'er up and put some 2 cycle oil in it. I always keep my tanks full.
 
Evapo - rust also make a product called Rust - Block.
Its for storing stuff after you have removed the rust using Evapo-rust.
I use it for a 77D fuel tank that I am keeping/storing long term. I pour 1 litre into the tank and swish it around until all the inside surface is coated and pour the remainder out for next time. I do this every 6 months. Its completely safe on everything and washes out with water.
Regards Ray.
 

Similar threads

B
My dead XS650
2
Replies
21
Views
1K
650Skull
650Skull
toglhot
Single points conversion, how to.
Replies
0
Views
507
toglhot
toglhot
toglhot
Making a two ramp points cam for single points conversion.
Replies
9
Views
898
bill932
B
Jim
Harbor Freight Gravity Feed Abrasive Blaster Gun with 20 oz. Hopper (Product Review)
2 3
Replies
40
Views
10K
toglhot
toglhot
Mike G
Generic front brake switch repair - not XS650
Replies
0
Views
771
Mike G
Mike G
Back
Top