Paint " Bling "

motormike

XS650 Guru
Top Contributor
XS650.com Supporter
Messages
1,269
Reaction score
4,067
Points
263
Location
Mpls
Our clients Xs2 is on its wheels and should be done end of month Paint work is almost finished.... just a clear coat and color sanding. All metal bits are in the correct candy colors. The tank is treated inside and sealed; outside is squared away. Then primer, sealer, harder's, base white, silver base, candy red... clear coat..color sanding... this would peg'd my pain six inches below the fourth belt loop. I do not do.. paint. The 72' Xs is the best look'n of the models. Once this is off the lift I can pull the 82' I bought ack from Joe College Kid and sort out the electrical gremlins. 😎
 

Attachments

  • Paint tank done.jpg
    Paint tank done.jpg
    77 KB · Views: 73
  • Paint tank test.jpg
    Paint tank test.jpg
    71.2 KB · Views: 70
  • Paint can.jpg
    Paint can.jpg
    280.7 KB · Views: 72
  • Xs Special copy.jpg
    Xs Special copy.jpg
    277.8 KB · Views: 77
Our clients Xs2 is on its wheels and should be done end of month Paint work is almost finished.... just a clear coat and color sanding. All metal bits are in the correct candy colors. The tank is treated inside and sealed; outside is squared away. Then primer, sealer, harder's, base white, silver base, candy red... clear coat..color sanding... this would peg'd my pain six inches below the fourth belt loop. I do not do.. paint. The 72' Xs is the best look'n of the models. Once this is off the lift I can pull the 82' I bought ack from Joe College Kid and sort out the electrical gremlins. 😎
House of Kolor? Someone's spending money! Looks great.
 
What did you use to seal the inside of tank?
Por 15 kit. A buddy pulled his 55' Nomad down to bare metal and treated the complete interior with Por 15... I didn't ask how much it set him back 😎
 
Back
Top