Search results

Found one on eBay that looks exactly like the one you have toglhot 7 bucks on eBay. I’m going to order it and see if that will work.

What exactly is an adjustable flasher?

I’ll look them up now. Is there one I need to look for specifically?

The flasher that I bought was a El12 that was recommended. Maybe I need a different one?

So I was thinking maybe if I wired my license plate lights that would complete the circuit and make them flash. So that’s what I did. My led license plate lights come on but again still nothing in the rear. Here’s a couple of pics of what I am talking about and a video of the fronts

I put in a led flasher already

They have no bulbs. I put in a one piece rear/brake/turn signals in the rear and tower/fork turns up front.

my front leds work just fine but when I plugged in the rears they just stay on no flash. The fronts flash but that’s it. I have an led flasher installed but I can’t figure out why the rears don’t flash. At first I thought it was a bad ground so I temp put a separate ground but still the same...

Ok sounds good I’ll go to the garage and try that here in a bit. But any tips on the front brakes?

The rear is drums and I have new ones for that but I can’t get the axle out so I moved on to the front pads. But those are being a pain in the ass too

I have a new master for the front. Yes the piston is compressed. Did it with my clamp like I do for my cars. The real axle got me frustrated. So I moved on to give me a break

So that axle will not come out. I guess I will leave it be for now until I order some new parts. Until than I am started on the front brakes. Old pads came out no problem but the new pads I’m having trouble with. One that goes against the prison fits fine but the other side I can’t seem to get...

It was on the center stand when I started and then I propped it on it’s side with a few wheels holding it up to let it slid through the bearing. I’ll have to keep going at it after work. It spins fine when on the center stand also.

Well I hit it knocker loose ALOT and still nothing. Won’t budge. Any other tricks you may have? Almost on the road. Trying to put the new shoes on in the rear did the front brakes already changed the filters and oil. Everything is wired but my rear turn signals and brake light bit that won’t...

Yeah I put the nut back on and sprayed penetrating oil on it and letting it sit. Maybe later tonight it will come free or ill let it sit overnight and try again tomorrow.

The bike is an 81 special

So I’m trying to remove the rear wheel so I can replace the brake shoes but it seems like the axle is stuck. I remove the brake line I remove the axle nut the cotter pins I moved the rear will forward to get a chain off but the axle won’t come off. Is there something else and I’m missing

Halogen bulb not led

Blue is to the yellow on switch Negative is grounded White is to the green on switch