Search results

  1. IronFist_650

    2025 Calendar Nominations & Calendar Information

    I accept
  2. IronFist_650

    Jets

    Do you mean this type air filter?
  3. IronFist_650

    Jets

    Thanks. No, i don't think it was imported. I will start with 45 pilot and 137.5 jets and go from there. Also change the pods. Thanks for your help!
  4. IronFist_650

    Jets

    here are the jets. Also, i have a fixed needle!
  5. IronFist_650

    Jets

    Hello! Need to rejet my carbs. Bs34, airpods, 1982 motor, aftermarket exhaust with cocktail muffler. Really bad throttle respons in the lower rpm. I read that the stock size jets for this carb should be: Main 132,5 and Pilot 42,5. My jets are way off, If i'm not missing something?? Edit: sorry...
  6. IronFist_650

    Let's See The XS's

    Finally my xs is done 🥳
  7. IronFist_650

    Quick timing question 😉

    So, the timing is set and i tried to sync the carbs. This is how it looks. They are synked but seems there are some leaks or something with the valves? Could both carbs be synced but at the same time have the exact leak or valve problem? Not much seems to happen when adjusting the mixture screw...
  8. IronFist_650

    Quick timing question 😉

    As gggGary said. Muck around 😉
  9. IronFist_650

    Quick timing question 😉

    Progress!!! Same on both cylinders 😃 Thanks for all the input. Best forum ever!!!
  10. IronFist_650

    Quick timing question 😉

    I can actually adjust them about 2mm. Wich one is for the right/left cylinder.
  11. IronFist_650

    Quick timing question 😉

    Approximately. Red-right. Yellow-left
  12. IronFist_650

    Quick timing question 😉

    I'm scratching my head here. Right cylinder is retarded and left advanced. Newtronic ignition. What to do 🤔
  13. IronFist_650

    Quick timing question 😉

    So, i have made some progress on the timing issue. But, it is still in the advanced side (on idle) and i can't rotate the timing plate any more. The cam chain is set with the pin flush and there are just a small movement when rotating the engine. With flush i mean when the pin is the furthest...
  14. IronFist_650

    Quick timing question 😉

    The advance unit is new. But i will check both. Just needed to start somewhere as this is all new to me. Thanks for all the input and tips. I try to learn as i go 😉
  15. IronFist_650

    Quick timing question 😉

    It's on idle
  16. IronFist_650

    Quick timing question 😉

    Oh... i never did anything with the brushes. Thanks for notice. I will have a look at that!
  17. IronFist_650

    What have you done to your XS today?

    Took it for the first test run.
  18. IronFist_650

    Quick timing question 😉

    Thanks! That make sense since there are kick backs
  19. IronFist_650

    Quick timing question 😉

    As i understand it my timing is retarded. Do i turn the timing plate clockwice to get it more advanced? Running a newtronic ignition and kickstart only. Cheers!
  20. IronFist_650

    This doesn't look healthy, bits from cam chain tensioner?

    This is the new filter after 20 min of running (not riding) Could maybe be from the old oil as i changed it coold?
Back
Top