Search results

Yo I'm retarded or just looking at dusty stuff in dark shed. I got a high beam and neutral in tach! Guess I was just looking at where the xs400 neutral light is too. I did need the help especially on the lining light. Sorry for y'all posting due to my misunderstanding.

Big thanks. Be lost without y'all. Bought bike in parts half there so one reason I'm slack at knowing what's what. Maybe I'll make stop lamp into neutral light since there's none. Seems more important.

Y'all think brake lining light is for front brake line? And stop lamp for taillight?

What do y'all think of the stop lamp and brake lining spelled wrong or foreign? Not a clue to how to wire it or what it means. Got a kill switch coming. Recently put a kill switch on dt1 69 endro but haven't tested it yet. It's kind that grounds out power before coil. The xs650 one power runs...

What you think of 18 gauge for it? I forget if it says a guage. I just studied up on some wire diagrams tonight after ordering some stuff so I guess I sound I little wish washy. My own harness might be cleaner or wires everywhere. It's an unknown. There's just a ton of wires to the speedo...

Can you just kill bike by turning off key if you wire the br and w/r together? Just got one coming anyhow but don't need the starter part. Was thinking of using a cheaper switch. But really don't know which switch is going to work with harness I got coming since I see one with plug and one...

Way more opinions than I knew about. Money wise I'm going to try stock. That way just buy a wiring harness. What's up with an automotive regulator and recitifier? Any suggestions? Was planning on getting one off eBay or from mikesxs but I suppose there are cheaper opinions. Got a timing...

All nuts man. The bad all nuts man. I gotta change them up if it matters. I knew I'd screw something up.

Which system is better to go with if have a choice? Right now hughs hand built is sold out so not sure if can get it or worth wait. Or should I buy the original points system stuff? I'm missing points rod timing thing wiring harness and need new coils condenser and probably need a regulator /...

Which head washers go where? Do the rubber ones go on the inside or outside. Have 4 metal and 4 rubber / metal ones. Does it really matter as long as theyre torqued. See someone used all copper instead of rubber ones. So I got confused since saw metal on outside. It looks like partzilla...

Finally got my timing chain on after buying new k&l chain and master link. Fished it threw Intire head. We had to hammer rivet with some punches because anvil was too small and too deep so it messed up on the rivet / breaker. Any advice on riveting anvil with the Amazon 20 piece 22 dollar one...

Sparkle pearl purple kustoms cans on black

Had to sand paper it and wire wheel it before primer. Next time do the washer in the middle of day sun and towel it immediately so no rust. It's wild how fast it wants to rust. I thought the washer tip worked wonders for 32 after tax on Amazon.

First used pool filter sand at 20 a bag. Then used quickret sand from Lowe's at 6 a bag but had to pick a few rocks out of it. It kinda wants to rust a little so I think I should of dryer it faster but hey I'll learn. Might need to take a little steel wool to it or sand it a little more but 2...

Got it to work. How about gasket sealer around the middle bolts? I don't see any on there. Do you not coat there? Thx

Nice read. I think reading to put the cam covers on before tighting head is going to be greatly useful. Plus I see how you tided the chain. A few images were broken for me maybe the main ones I wanted to see didn't load. I'm halfway there. I might need to compress head with pvc and washers...

I had rotor and stator off when I made my mark with head off just looking at piston.

I marked tdc with a marker looking at the pistons. However when I put the rotor on my marks line up more around f mark than on t mark. Is this normal? I should set my cam chain sprocket to line up with the t mark right? The f mark is just for points right? I'm just a little confused about...

Wow thanks. I'm gonna try what I got coming first mainly because I'm unsure about fishing a new chain threw. It would probably twist on me and not fish threw with my luck and don't want to take her apart again. Wish I knew there were thicker chains before hand. Would of got one. Any thoughts...